2.5-Inch Leveling Kit for 2019–2024 Ford Ranger
- Fits 2019–2024 Ford Ranger 4WD and RWD in Lariat, XL, and XLT trim
- Raises the front 2.5 inches with a strut spacer and hardware set — no strut disassembly
- Not for Tremor-package trucks or models with auto-adjusting headlights
- Aftermarket wheels: 93.1mm minimum center bore, 6.5 inch maximum backspacing
- Install time 2-4 hours; downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 10 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with auto adjusting headlights
Does NOT work on models equipped with Tremor package. After-market wheels must have a minimum of 93.1mm center bore and maximum 6.5" back spacing. Wheels with less than 6.5" backspacing may require slight trimming. 9" wide wheels will require trimming. Fitment on this page is based on the manufacturer’s application data.
About this part
2.5-Inch Leveling Kit, fitment-checked
Rough Country 50100 raises the front of the 2019–2024 Ford Ranger by 2.5 inches using a pair of strut spacers and hardware — the factory struts stay assembled. It does not fit Tremor-package trucks or models with auto-adjusting headlights. Aftermarket wheels need at least a 93.1mm center bore and no more than 6.5 inches of backspacing.
This 2.5 inch leveling kit for the 2019–2024 Ford Ranger 4WD and RWD covers the Lariat, XL, and XLT trims listed in the fitment section. It is a bolt-on strut spacer package, so the factory struts never have to come apart — budget 2-4 hours in the driveway. Check your wheels first: the center bore has to clear 93.1mm, backspacing tops out at 6.5 inches, and anything shallower than that (or a 9 inch wide wheel) can call for light trimming. Tremor-package trucks and models with auto-adjusting headlights are not covered. A downloadable installation guide is available.
Specifications
Specs
| Brand | Rough Country |
| Part number | 50100 |
| UPC / GTIN | 00843030160180 |
| Lift height | 2.5 in |
| Shipping weight | 3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
1.5 Inch
1.5 Inch
2 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch