Rear Bumper with 4.75-Ton D-Rings for Jeep Wrangler TJ
- Fits 1987-2006 Jeep Wrangler 4WD
- 5/32-inch steel plate with 2-inch by .120-inch wall tubing
- 4.75-ton D-rings on mounts welded inside and out
- Not rated for class III towing; the license plate must be relocated
- Install time listed at 2-3 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Requires relocation of license plate or our TJ License Plate Adapter Not rated for class III towing Fitment on this page is based on the manufacturer’s application data.
About this part
Rear Bumper with 4.75-Ton D-Rings, fitment-checked
Rough Country 10591 is a steel rear bumper for the 1987-2006 Jeep Wrangler 4WD, built from 5/32-inch plate and 2-inch tubing. D-rings rated at 4.75 tons sit on tabs welded inside and out. It is not rated for class III towing, and the license plate has to move — Rough Country's TJ license plate adapter covers that.
Squared-off steel across the back of the 1987-2006 Jeep Wrangler 4WD, using 5/32-inch plate and 2-inch by .120-inch wall tubing so the corners take a hit without folding. The recovery points are why most owners fit it: 4.75-ton D-rings on tabs welded from both sides rather than tacked to the surface. Two things to sort out before ordering — it is not rated for class III towing, and the factory plate location is covered, so plan on the Rough Country TJ license plate adapter or another spot. Install runs 2-3 hours with a downloadable guide available. Shipping weight: 59 lb.
Specifications
Specs
| Brand | Rough Country |
| Part number | 10591 |
| UPC / GTIN | 00843030149314 |
| Shipping weight | 59 lb |
| Country of origin | CN |
| Category | Bumpers & Armor › Rear Bumpers |
Why buy here
The fitment-first store
Keep looking
More Rear Bumpers
6 Inch
6 Inch
