2.5-Inch Lift Kit for 2019-2020 Ford F-150 Raptor 4WD

About this part

2.5-Inch Lift Kit, fitment-checked

Rough Country 51031 is a 2.5-inch lift kit for the 2019-2020 Ford F-150 Raptor 4WD. Front lift comes from upper strut spacers plus preload spacers, and the rear uses lift blocks with U-bolts and hardware to even out the stance front to rear. Strut disassembly is required to complete the front side of the job.

This 2.5-inch lift kit for the 2019-2020 Ford F-150 Raptor 4WD bolts on with the factory suspension geometry intact, adding ground clearance and leveling the truck front to rear while keeping the stock ride character. The front kit supplies two upper strut spacers and two preload spacers; the rear adds two lift blocks, four U-bolts, and hardware. Plan on pulling the struts apart during the install. Rough Country lists 3-5 hours for the job, and a downloadable installation guide is available. Tire and wheel combinations up to 37x12.50R17 are listed, with some 20x10 and 20x12 setups calling for trimming.