4.5-Inch Lift Kit with N3 Shocks for 2007–2015 Toyota Tundra
- Fits 2007–2015 Toyota Tundra 4WD and RWD, including SR, SR5, Limited, Platinum, and 1794 Edition
- Does not fit Pro Series, Rock Warrior, or XSP-X models
- Requires 18-inch or larger wheels; tires no wider than 11.5 inches, and 35-inch tires may need minor trimming
- Includes high-clearance crossmember, strut spacers, knuckle kit, and an N3 shock pair
- Minor cutting and drilling required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models Does NOT fit Rock Warrior models Does NOT fit XSP-X models
Minor cutting and drilling is required. Requires 18-inch or larger wheels. Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch. In some cases minor trimming may be needed to clear 35-inch tires. On vehicles equipped with a two piece driveshaft there is the potential for take off vibration this can be corrected with SKU: 1776BOX1 carrier bearing shim kit. Please view instructions for complete information on proper tire / wheel combinations. Fitment on this page is based on the manufacturer’s application data.
About this kit
4.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 75330 is a 4.5-inch lift kit for the 2007–2015 Toyota Tundra in 4WD and RWD, built around a high-clearance crossmember, strut spacers, a knuckle kit, fabricated blocks, and a pair of N3 shocks. It levels the front with the rear and works with factory 18-inch or larger wheels. It does not fit Pro Series, Rock Warrior, or XSP-X models.
This 4.5-inch lift kit for the 2007–2015 Toyota Tundra ships as five boxed groups: the main lift hardware, strut spacer set, high-clearance crossmember, knuckle kit, and an N3 shock pair. Struts are spaced without disassembly or a spring compressor, and the stock differential mounts, drivetrain, and exhaust stay as-is. Plan on minor cutting and drilling. Wheels must be 18 inches or larger, tire width tops out at 11.5 inches, and 35-inch tires may call for light trimming. Trucks with a two-piece driveshaft can see take-off vibration, addressed with carrier bearing shim kit 1776BOX1. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Up 4in Kit Box 751BOX1
- 1× Up Strut Spacer Box 752BOX2
- 1× Crossmember Box 752BOX3
- 1× Knuckle Kit 1775BOX2
- 1× N3 Shock Pair 23208
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 75330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 75330 |
| UPC / GTIN | 00843030125103 |
| Lift height | 4.5 in |
| Shock package | N3 series |
| Shipping weight | 159.64 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
6 Inch
6 Inch
3.5 Inch
3.5 Inch
6 Inch
6 Inch
3.5 Inch
6 Inch
6 Inch
6 Inch