4-Inch Lift Kit with N3 Shocks for 2022–2025 Toyota Tundra
- Fits compatible 2022–2025 Toyota Tundra 4WD and RWD models — review the full fitment list
- Does not fit TRD Pro Series or XSP-X models, or trucks equipped with the rear air ride system
- Requires wheels 20 inches or larger
- Kit contents: lifted knuckles, strut spacers, front and rear crossmembers, differential drop and brake line brackets, bumpstop parts, skid plate, coil spring
- Cutting and drilling required; Toyota Safety Sense recalibration may be needed — install time listed at 8-10 hours
- Downloadable installation guide available. Shipping weight: 199.0 lb
Check tire fit for this kit → The manufacturer publishes 4 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- TRD Pro Series models
- Vehicles with rear air ride system
- XSP-X models
Cutting and drilling is required. Requires 20-inch or larger wheels. Fitment on this page is based on the manufacturer’s application data.
About this kit
4-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 70430 is a 4-inch lift kit for compatible 2022–2025 Toyota Tundra models in 4WD and RWD. The kit pairs lifted knuckles, strut spacers, and front and rear crossmembers with an N3 shock pair, and calls for 20-inch or larger wheels. It does not fit TRD Pro Series, XSP-X, or trucks with the rear air ride system.
This 4-inch lift kit for the 2022–2025 Toyota Tundra covers SR, SR5, Limited, Platinum, 1794 Edition, and Capstone applications listed in the fitment section, in both 4WD and RWD. A high-clearance crossmember design carries the front end while factory track width and alignment specs are retained, and rear upper control arm relocation brackets handle droop clearance. Cutting and drilling are part of the job, and Toyota Safety Sense may need recalibration afterward. Rough Country lists an install time of 8-10 hours. Check the exclusion list and the 20-inch wheel minimum, then work from the downloadable installation guide.
What’s in the box
Kit contents
- 1× Knuckles 71230991
- 1× 4in Kit Box 70430992
- 1× Crossmember Box 75900991
- 1× 4IN Strut Spacer Box 70430994
- 1× 6in Kit Box 71230995
- 1× N3 Shock Pair 23328
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 70430 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 70430 |
| UPC / GTIN | 00840269926563 |
| Lift height | 4 in |
| Shock package | N3 series |
| Shipping weight | 199 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
6 Inch
6 Inch
3.5 Inch
3.5 Inch
6 Inch
6 Inch
3.5 Inch
6 Inch
6 Inch
6 Inch