6-Inch Lift Kit with N3 Shocks for 2022–2026 Toyota Tundra — Part 71230
- Fits compatible 2022–2026 Toyota Tundra 4WD and RWD — check the full fitment list first
- Excludes TRD Pro (1.1 inch factory lift), AVS-equipped, rear air ride, and XSP-X models
- Kit contents: knuckles, high-clearance crossmember, strut spacers, skid plates, and an N3 shock pair
- Clears 35-inch tires; 37-inch tires need minor trimming based on wheel offset
- Requires 20-inch or larger aftermarket wheels; cutting and drilling required
- Toyota Safety Sense recalibration may be needed after install. Shipping weight: 209.7 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- TRD Pro Series models
- Vehicles with rear air ride system
- XSP-X models
Cutting and drilling is required. Requires 20-inch or larger wheels. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 71230 is a 6-inch lift kit for compatible 2022–2026 Toyota Tundra 4WD and RWD models. The box ships with a high-clearance crossmember, knuckles, strut spacers, skid plates, rear upper control arm relocation brackets, and an N3 shock pair. Cutting and drilling are part of the job, and aftermarket wheels of 20 inches or larger are required.
This 6-inch lift kit for the 2022–2026 Toyota Tundra 4WD and RWD covers SR, SR5, Limited, Platinum, Capstone, and 1794 Edition applications listed in the fitment section. It will not work on TRD Pro models, which carry a 1.1 inch factory lift, and it is off the table for trucks with Adaptive Variable Suspension, the factory rear load-leveling air suspension, or XSP-X trim. Factory track width and alignment specs are retained. Tire clearance runs to 35 inches, with 37-inch tires possible after minor trimming depending on offset. Toyota Safety Sense recalibration may be needed afterward. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Knuckles 71230991
- 1× 6in Kit Box 71230996
- 1× Crossmember Box 75900991
- 1× Strut Spacer Box 71230994
- 1× 6in Kit Box 71230995
- 1× N3 Shock Pair 23329-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 71230 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 71230 |
| UPC / GTIN | 00840269911972 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 209.7 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here