6-Inch Lift Kit with N3 Struts for 2005-2015 Toyota Tacoma
- Fits 2005-2015 Toyota Tacoma 2WD and 4WD, Base and Pre Runner — check the fitment list against your truck
- Does not fit TRD Pro or T/X Baja models with the 1-inch factory lift, or five-lug models
- Aftermarket wheels required; factory backspacing and offset contact the supplied knuckles
- Clears tires up to 33x12.50
- Includes loaded N3 strut pair, lifted knuckles, front and rear crossmembers, skid plate, and fabricated lift blocks
- Cutting and drilling required — downloadable installation guide available. Shipping weight: 157.3 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- TRD Pro models
- T/X Baja models
- Five lug models
Requires cutting and drilling. Requires aftermarket wheels for adequate clearance of the supplied knuckle. Does NOT work with factory wheels due to factory backspacing/offset causing contact issues with the supplied knuckles. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Struts, fitment-checked
Rough Country 747.23 is a 6-inch lift kit for the 2005-2015 Toyota Tacoma in 2WD and 4WD, built around a loaded N3 strut pair, lifted knuckles, front and rear crossmembers, a skid plate, and fabricated lift blocks. Aftermarket wheels are required to clear the supplied knuckles, and factory wheel backspacing and offset will contact them. TRD Pro, T/X Baja, and five-lug trucks are not covered.
This 6-inch lift kit for the 2005-2015 Toyota Tacoma ships as five boxed sub-assemblies: crossmember, skid plate, knuckle, the 6in N3 strut hardware, and a matched loaded strut pair. Cutting and drilling are part of the job, though the struts arrive assembled, so no strut compressor work is needed. Tire clearance runs up to 33x12.50. Confirm your truck is not a TRD Pro or T/X Baja with the 1-inch factory lift, is not a five-lug model, and that you have aftermarket wheels on hand, then work through the downloadable Rough Country installation guide before starting.
What’s in the box
Kit contents
- 1× Crossmember Box 1746BOX1
- 1× Skid Plate Box 1746BOX2
- 1× Knuckle Box 1749BOX2
- 1× 6in N3 Box Kitstruts 1747BOX4
- 1× Loaded Strut Pair 501080
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 747.23 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 747.23 |
| UPC / GTIN | 00843030125356 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 157.3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here