6-Inch Lift Kit with N3 Shocks for 2007-2015 Toyota Tundra
- Fits 2007-2015 Toyota Tundra 4WD and RWD — does not fit Pro Series, Rock Warrior, or XSP-X models
- Kit contents: main 6-inch kit box, upper strut spacers, high-clearance crossmember, knuckle kit, and an N3 shock pair
- Requires 18-inch or larger wheels; tires no wider than 11.5 inches, with possible trimming for 35-inch tires
- Two-piece driveshaft trucks may need carrier bearing shim kit 1776BOX1 to settle take-off vibration
- Minor cutting and drilling required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models Does NOT fit Rock Warrior models Does NOT fit XSP-X models
Minor cutting and drilling is required. Requires 18-inch or larger wheels. Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch. In some cases minor trimming may be needed to clear 35-inch tires. On vehicles equipped with a two piece driveshaft there is the potential for take off vibration this can be corrected with SKU: 1776BOX1 carrier bearing shim kit. Please view instructions for complete information on proper tire / wheel combinations. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 75430 is a 6-inch lift kit for the 2007-2015 Toyota Tundra in 4WD and RWD, built around a high-clearance crossmember, fabricated blocks, strut spacers, a knuckle kit, and an N3 shock pair. Minor cutting and drilling is part of the job. It does not fit Pro Series, Rock Warrior, or XSP-X models.
This 6-inch lift kit for the 2007-2015 Toyota Tundra 4WD and RWD covers SR, SR5, Base, Limited, Platinum, and 1794 Edition applications listed in the fitment section, and levels the front with the rear. Wheels must be 18 inches or larger; factory 18-inch and larger wheels work, but tire width is capped at 11.5 inches, and 35-inch tires may call for minor trimming. Trucks with a two-piece driveshaft can develop take-off vibration, addressed with carrier bearing shim kit 1776BOX1. A downloadable installation guide is available for wheel and tire details.
What’s in the box
Kit contents
- 1× 6in Kit Box 752BOX1
- 1× Up Strut Spacer Box 752BOX2
- 1× Crossmember Box 752BOX3
- 1× Knuckle Kit 1775BOX2
- 1× N3 Shock Pair 23208
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 75430 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 75430 |
| UPC / GTIN | 00843030125097 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 188 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here