M1 Rear Coil Over Shocks for Polaris Ranger (2013–2024)
- Covers 2013–2024 Polaris Ranger 900 XP, XP 1000, Crew XP 1000, and Ranger 1000 applications — check the fitment list for your exact trim
- Does not fit NorthStar Edition; machines loaded with a cargo rack or other accessories may fall short of 2 inches of lift
- Threaded, grooved body adjusts 0 to 2 inches on the vehicle; spanner wrench supplied
- Monotube design with 46mm digressive piston, 18mm chromed shaft, and a 2-inch zinc-plated shock body
- Install time: 2-3 hours. Shipping weight: 28.0 lb
- Covered by a 3 Year Limited Warranty
The Trail Fortress check
Will it fit your truck?
✓ Fits
+ 36 more applications
✕ Does not fit
- NorthStar Edition
Vehicles equipped with a cargo rack or other accessories may not achieve 2" of lift. Fitment on this page is based on the manufacturer’s application data.
About this part
M1 Rear Coil Over Shocks, fitment-checked
Rough Country 301002 is a pair-application M1 rear coil over shock setup for a wide span of Polaris Ranger models, from the 2013–2017 Ranger 900 XP through 2020–2024 Ranger 1000 and Crew XP 1000 Premium machines. Ride height adjusts from 0 to 2 inches on the threaded body, and the spanner wrench needed to make that adjustment comes with the shocks. NorthStar Edition machines are not covered.
These M1 rear coil over shocks fit 2013–2024 Polaris Ranger models across the 900 XP, XP 1000, Crew XP 1000, and Ranger 1000 families listed in the fitment section. Ride height is set anywhere from 0 to 2 inches using the grooved, threaded shock body, so you can change stance after the shocks are bolted in rather than pulling them back off. Construction is monotube with a 46mm digressive piston and an 18mm chromed shaft inside a 2-inch zinc-plated body. Check the exclusions first: NorthStar Edition is not covered, and a Ranger carrying a cargo rack or similar added weight may not reach the full 2 inches.
Specifications
Specs
| Brand | Rough Country |
| Part number | 301002 |
| UPC / GTIN | 00840269903212 |
| Shock package | M1 series |
| Shipping weight | 28 lb |
| Warranty | 3 Year Limited Warranty |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Shocks & Struts |
Why buy here