1.25-Inch Body Lift Kit for Colorado and Canyon (2015-2022)
- Fits 2015-2022 Chevrolet Colorado and GMC Canyon, 4WD and RWD; not Duramax diesel models
- Front and rear bumper brackets included; the rear brackets are appearance-only and the bumper cannot be used for towing
- Fiberglass-reinforced nylon pucks with grade 10.9 body mount bolts and zinc-coated hardware
- Drilling required; trimming may be needed with offset wheels, and hub-centric wheels or spacers are recommended
- Factory fender flares: front flares must be removed to fit the front bumper brackets, and new double-sided tape is needed to reinstall them
- Downloadable installation guide available; 3-4 hours. Shipping weight: 23.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with Duramax diesel engine Requires drilling If offset wheels are used trimming may be required If installing aftermarket wheels or wheel spacers it is highly recommended they be hub-centric Rear bumper brackets are to enhance appearance only bumper cannot be used for towing If equipped with factory fender flares - Front flares must be removed to install the front bumper brackets
To re-install new double sided tape is required. Fitment on this page is based on the manufacturer’s application data.
About this part
1.25-Inch Body Lift Kit, fitment-checked
A 1.25-inch body lift kit for the 2015-2022 Chevrolet Colorado and GMC Canyon, using fiberglass-reinforced nylon pucks, grade 10.9 body mount bolts, and zinc-coated hardware. Front and rear bumper brackets are both in the kit. Installation requires drilling. It does not fit Duramax diesel trucks, and if the truck has factory fender flares, the front flares must come off to fit the front bumper brackets, which means new double-sided tape to put them back on.
This 1.25-inch body lift kit covers the 2015-2022 Colorado in Base, WT, LT, and Z71 and the 2015-2022 Canyon from SL and SLE through All Terrain, Elevation, Denali, and SLT, in 4WD and RWD. It opens room for larger tires without touching suspension geometry, so factory ride quality and stock wheels both carry over. Plan for drilling during the install, and note that the rear bumper brackets are cosmetic, with the bumper not usable for towing. Trimming may be needed with offset wheels, and hub-centric wheels or spacers are recommended. The install is listed at 3-4 hours.
Specifications
Specs
| Brand | Rough Country |
| Part number | 923 |
| UPC / GTIN | 00843030116606 |
| Lift height | 1.25 in |
| Shipping weight | 23 lb |
| Country of origin | US |
| Category | Bumpers & Armor › Body Armor |
| Installation guide | Downloadable PDF |
Why buy here