3.25-Inch Lift Kit for Colorado & Canyon 2WD/4WD (2015-2022)
- Fits compatible 2015-2022 Chevrolet Colorado and GMC Canyon 2WD/4WD trucks. Check the fitment list and exclusions
- Does not fit Duramax diesel engines or Trail Boss and ZR2 models
- Kit contents: 2-inch leveling kit (924 pairs SKUs 922 and 923) plus 1.25-inch body lift kit
- Drilling required; offset wheels may call for trimming, and hub-centric wheels or spacers are recommended
- Rated install time 5-6 hours: downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 4 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with Duramax diesel engine Does NOT fit Trail Boss/ZR2 models
Requires drilling If offset wheels are used trimming may be required If installing aftermarket wheels or wheel spacers it is highly recommended they be hub-centric Rear bumper brackets are to enhance appearance only bumper cannot be used for towing If equipped with factory fender flares - Front flares must be removed to install the front bumper brackets. To reinstall new double sided tape is required. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.25-Inch Lift Kit, fitment-checked
Rough Country 924 is a 3.25-inch lift kit for compatible 2015-2022 Chevrolet Colorado and GMC Canyon 2WD/4WD trucks, built from a 2-inch leveling kit paired with a 1.25-inch body lift kit. It evens out the factory nose-down stance, adds ground clearance, and works with the factory wheels. It does not fit Duramax diesel trucks or Trail Boss and ZR2 models.
This 3.25-inch lift kit for the 2015-2022 Chevrolet Colorado and GMC Canyon 2WD/4WD stacks two Rough Country kits: the 2-inch leveling kit with upper strut spacers, pre-load spacers, and hardware, plus the 1.25-inch body lift with fiberglass-reinforced nylon pucks, zinc-coated hardware, and 10.9 grade body mount bolts. Front and rear bumper brackets come with the body lift; the rear brackets are cosmetic and are not a towing point. Drilling is required, and trucks with factory fender flares need the front flares removed to fit the front brackets. Rough Country lists 5-6 hours for installation, and a downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2 Inch Leveling Kit 922$49.95
- 1× 1.25 Inch Body Lift Kit 923$149.95
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 924 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 924 |
| UPC / GTIN | 00843030125837 |
| Lift height | 3.25 in |
| Shipping weight | 24 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
4 Inch
6 Inch
4 Inch
6 Inch
4 Inch
1.25 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch