1.5-Inch Lift Kit with N3 Struts for 2017–2023 GMC Acadia
- Fits 2017–2023 GMC Acadia in FWD and 4WD: AT4, Denali, SL, SLE, and SLT
- Premium loaded N3 struts up front, coil springs at the rear, for 1.5 inches of lift
- Cam bolts included to hold alignment specs after the lift
- Does not work on models with adaptive ride control
- Listed install time: 3-4 hours. Downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 4 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
Will it fit your truck?
✓ Fits
Does NOT work on models with adaptive ride control. Fitment on this page is based on the manufacturer’s application data.
1.5-Inch Lift Kit with N3 Struts, fitment-checked
Rough Country 110031A raises the front and rear of the 2017–2023 GMC Acadia by 1.5 inches on FWD and 4WD models. The kit pairs premium loaded N3 struts and cam bolts up front with new rear coil springs. It does not work on Acadias with adaptive ride control. Budget 3-4 hours for the install.
The 1.5-inch lift here comes from a loaded strut assembly up front and taller coil springs at the rear, which brings the nose of the 2017–2023 GMC Acadia up level with the back. Cam bolts are supplied so alignment can be brought back into spec, and an N3 shock pair handles damping. AT4, Denali, SL, SLE, and SLT trims are covered in both FWD and 4WD. Acadias fitted with adaptive ride control are not supported. Rough Country lists the job at 3-4 hours, and a downloadable installation guide is available.
Kit contents
- 1× Loaded Strut Pair 501115$369.95
- 1× 2017-PRESENT GMC ACADIA/CHEVY BLAZER REAR 1.5IN COIL 9440
- 1× N3 Shock Pair 23320
- 1× 1.5in Lift Kit Box 11005BOX1
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 110031A kit fits the vehicles shown in the fitment section above.
Specifications
| Brand | Rough Country |
| Part number | 110031A |
| UPC / GTIN | 00840269901041 |
| Lift height | 1.5 in |
| Shock package | N3 series |
| Shipping weight | 87 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
More Lift Kits
1.5 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
4.5 Inch
4.5 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch