2.5-Inch Coil Leveling Kit with M1 Shocks for 2020–2023 Gladiator
- Coil-spring leveling package matched with two pairs of M1 monotube shocks
- Covers 2020–2023 Jeep Gladiator 4WD, Sport through Rubicon
- Bolt-on install, no cutting or welding
- Excludes the 3.0L EcoDiesel V6 and Mojave models equipped with 2.5 shocks
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
- Mojave models equipped with FOX 2.5 shocks which use a larger shock bolt incompatible with our replacement shocks
35" tires will clear but may rub during extreme articulation. If running 35" tires on factory wheels verify clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Coil Leveling Kit with M1 Shocks, fitment-checked
The M1 monotube build of the coil-spring Gladiator leveling kit. Part 64840 brings 2.5 inches of leveling to 2020–2023 Jeep Gladiator 4WD trucks using application-tuned coil springs and two pairs of M1 monotube shocks. Not for the 3.0L EcoDiesel V6 or Mojave models equipped with 2.5 shocks.
Springs, not spacers: this 2.5-inch leveling kit for the 2020–2023 Jeep Gladiator 4WD uses application-tuned coil springs to set the new height and two pairs of M1 monotube shocks to control it. The whole thing bolts on, with no cutting or welding called for. Coverage runs across Sport, Sport S, Willys, Willys Sport, Rubicon, Overland, Texas Trail, and the Launch Edition and anniversary trims. Trucks with the 3.0L EcoDiesel V6 are excluded, as are Mojave models equipped with 2.5 shocks. Tires up to 35 inches will clear, with some rub possible at full articulation.
What’s in the box
Kit contents
- 1× 2.5in Leveling Coil Kit Box 648BOX1
- 1× M1 MONOTUBE SHOCK PAIR 770738P
- 1× M1 MONOTUBE SHOCK PAIR 770808P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 64840 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 64840 |
| UPC / GTIN | 00840269918438 |
| Lift height | 2.5 in |
| Shock package | M1 series |
| Shipping weight | 53 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Leveling Kits |
| Installation guide | Downloadable PDF |
Why buy here