2.5-Inch Leveling Kit with M1 Shocks for 2024–2025 Jeep Gladiator
- M1 Monotube shock pairs front and rear with factory-rate coil springs
- Fits 2024–2025 Jeep Gladiator 4WD — Sport, Willys, Rubicon, and more
- Excludes Mojave models with the larger factory 2.5 shocks
- Tires up to 35 inches clear; may rub under extreme articulation
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Mojave models equipped with FOX 2.5 shocks which use a larger shock bolt incompatible with our replacement shocks
35" tires will clear but may rub during extreme articulation. If running 35" tires on factory wheels verify clearance between the front tire lower control arm and sway-bar links. Fitment on this page is based on the manufacturer’s application data.
About this kit
2.5-Inch Leveling Kit with M1 Shocks, fitment-checked
The 2.5 inch leveling kit for the 2024–2025 Jeep Gladiator 4WD, built around M1 Monotube shock pairs front and rear plus factory-rate coil springs. Installation is bolt-on with no cutting. Mojave models with the larger factory 2.5 shocks are not covered, and tires up to 35 inches will clear after a clearance check on factory wheels.
M1 Monotube shocks are what set this version of the 2.5 inch Gladiator leveling kit apart — a matched pair for the front and a matched pair for the rear, packaged with factory-rate coil springs. Fitment covers 2024–2025 Jeep Gladiator 4WD models, with Mojave trucks excluded where the larger factory 2.5 shocks are fitted. Nothing needs to be cut, and the spring rate mirrors the original, so the truck keeps its road manners while the nose comes up level. Tires up to 35 inches clear, with possible contact at full articulation.
What’s in the box
Kit contents
- 1× 2.5in Leveling Coil Kit Box 78400991
- 1× M1 MONOTUBE SHOCK PAIR 770738P$179.95
- 1× M1 MONOTUBE SHOCK PAIR 770808P
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 78440 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 78440 |
| UPC / GTIN | 00840269952654 |
| Lift height | 2.5 in |
| Shock package | M1 series |
| Shipping weight | 53 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
