2.5-Inch Leveling Kit for 2006–2011 Dodge Ram 1500 4WD
- Fits 2006–2010 Dodge Ram 1500 4WD and the 2011 Ram 1500 4WD
- No strut disassembly required — install time listed at 1-3 hours
- Does not fit Mega Cab models
- Clears 33-inch tires on factory 17-, 18-, or 20-inch wheels
- Downloadable installation guide available — shipping weight: 4 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Dodge Ram 1500 Mega Cab models
For a visual please click here. Prior to Installation Note: Under hard acceleration in 4x4 high unlifted Dodge Ram's often have a front end vibration or shutter. This vibration or shutter exist due to the design of the motor and differential mounts and is inherent in the vehicle. This vibration or shutter may be more pronounced after a leveling kit is installed due to additional torque from modified driveshaft angles. This does not indicate a problem but should be a consideration prior to installation. Fitment on this page is based on the manufacturer’s application data.
About this part
2.5-Inch Leveling Kit, fitment-checked
Strut spacers and hardware add 2.5 inches up front on the 2006–2010 Dodge Ram 1500 and the 2011 Ram 1500 in 4WD, and the struts never have to come apart to fit them — one reason the job lands in the 1-3 hour range. Mega Cab trucks are excluded. Worth knowing before ordering: these Rams can show a front-end shudder under hard acceleration in 4x4 high, and leveling can make it more noticeable.
A 2.5-inch leveling kit for the 2006–2010 Dodge Ram 1500 and 2011 Ram 1500 4WD, built around strut spacers that install without disassembling the strut — no special tools, no cutting, no welding. Plan on 1-3 hours in the driveway. The result is a level stance with clearance for 33-inch tires. Mega Cab models are excluded. Rough Country also flags that these trucks can show a front-end shudder under hard acceleration in 4x4 high, and that leveling can make it more pronounced; it is inherent to the vehicle rather than a fault in the kit. A downloadable installation guide is available.
Specifications
Specs
| Brand | Rough Country |
| Part number | 395 |
| UPC / GTIN | 00843030110154 |
| Lift height | 2.5 in |
| Shipping weight | 4 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
| Installation guide | Downloadable PDF |
Why buy here