6-Inch Lift Kit with N3 Shocks for Toyota Tacoma (2016-2023)
- Fits 2016-2023 Toyota Tacoma in 4WD and RWD — SR, SR5, TRD Sport, TRD Off-Road, Trail, Limited
- Kit contents: lifted knuckles, front and rear crossmember boxes, skid plate box, and a 6-inch N3 box kit
- Clears tires up to 33x12.50
- No strut disassembly or strut compressor needed; cutting and drilling required
- Factory wheels do not work — aftermarket wheels required for knuckle clearance
- Does not fit TRD Pro, T/X Baja, or five-lug models. Shipping weight: 161.7 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- TRD Pro models
- T/X Baja models
- Five lug models
Requires cutting and drilling. Requires aftermarket wheels for adequate clearance of the supplied knuckle. Does NOT work with factory wheels due to factory backspacing/offset causing contact issues with the supplied knuckles. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Shocks, fitment-checked
A 6-inch lift kit for the 2016-2023 Toyota Tacoma in 4WD and RWD (Rough Country 75820), built with lifted knuckles, front and rear crossmembers, fabricated lift blocks, and an N3 shock package. It clears tires up to 33x12.50 and installs without strut disassembly or a strut compressor. Cutting and drilling are required, factory wheels will not work, and TRD Pro, T/X Baja, and five-lug models are excluded.
This 6-inch Tacoma kit covers 2016-2023 trucks in both 4WD and RWD, across SR, SR5, TRD Sport, TRD Off-Road, Trail and Limited. Lifted knuckles, front and rear crossmembers, fabricated lift blocks and a 6-inch N3 box kit make up the package, and no strut disassembly or strut compressor is needed to put it together. Tire clearance runs up to 33x12.50. Two things to settle before ordering: cutting and drilling are part of the install, and factory wheels will not work — their backspacing and offset contact the supplied knuckles, so aftermarket wheels are required. TRD Pro and T/X Baja trucks already carry a 1-inch factory lift and are excluded, as are five-lug models. Shipping weight: 161.7 lb.
What’s in the box
Kit contents
- 1× Skid Plate Box 1746BOX2
- 1× Crossmember Box 1748BOX3
- 1× Knuckle Box 1749BOX2
- 1× 6in N3 Box Kit 1758BOX2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 75820 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 75820 |
| UPC / GTIN | 00843030124205 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 161.7 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here