2-Inch Wheel Spacers, M14x1.5 — 4.8-Inch Hub-Centric Bore
- Pair of 2-inch spacers — services one axle; 4.8-inch hub-centric bore, M14x1.5 preinstalled studs
- Only for vehicles with 14mm x 1.5-inch wheel studs; not for dually models or 2017+ models with the 4-inch axle
- Factory rotor retainer star washers come off first; check that the spacer seats flat and factory studs stay inside it
- Studs can be ground back 1/8 inch when extra wheel clearance is needed — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
Universal part — no vehicle-specific application data.
✕ Does not fit
- Dually models
- 2017+ models with 4-inch axle
Factory rotor retainer star washers must be removed for proper installation. Works with hub-centric OE wheels and lug-centric aftermarket wheels. ONLY fits models with 14mm x 1.5-inch wheel studs. Ensure the wheel spacer sits flat on the mounting surface and that factory wheel studs do not extend beyond the spacer. Grind stud ends 1/8" if additional wheel clearance is required. Fitment on this page is based on the manufacturer’s application data.
About this part
2-Inch Wheel Spacers, M14x1.5 — 4.8-Inch Hub-Centric Bore, fitment-checked
Rough Country 1094A is a pair of 2-inch wheel spacers machined from 6061-T6 aluminum with a corrosion-resistant finish, a 4.8-inch hub-centric center bore, and preinstalled studs. Threading is M14x1.5, so the vehicle must use 14mm x 1.5-inch wheel studs. These spacers do not fit dually applications, and they do not fit 2017-and-newer models with the 4-inch axle. They work with hub-centric factory wheels as well as lug-centric aftermarket wheels.
Specifications
Specs
| Brand | Rough Country |
| Part number | 1094A |
| UPC / GTIN | 00843030130374 |
| Lift height | 2 in |
| Shipping weight | 16 lb |
| Country of origin | CN |
| Category | Wheels & Tires › Wheel Spacers |
| Installation guide | Downloadable PDF |
Why buy here