3.5-Inch Lift Kit with N3 Shocks for 2023–2025 Toyota Sequoia 4WD
- Fits 2023–2025 Toyota Sequoia 4WD — SR5, Limited, Platinum, Capstone, and 1794 Edition applications shown in the fitment table
- Excluded: Pro Series models, Adaptive Variable Suspension (AVS), and Load-Leveling Rear Height Control Air Suspension
- N3 shock pair plus (2) upper control arms that hold ball joints at a working angle after the lift
- Front package adds strut spacers, differential spacers, and a skid plate; rear adds coil spring spacers and a track bar relocation bracket
- Bolt-on with no cutting or drilling; listed install time 4-6 hours, downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 1 verified tire size for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models
- Models equipped with Adaptive Variable Suspension (AVS) system
- Models equipped with Load-Leveling Rear Height Control Air Suspension
About this kit
3.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 70330_A is a 3.5-inch lift kit for 2023–2025 Toyota Sequoia 4WD, built around an N3 shock pair, upper control arms, and a skid plate package. It does not fit Pro Series models, or trucks running the Adaptive Variable Suspension (AVS) system or Load-Leveling Rear Height Control Air Suspension.
This 3.5-inch lift kit for the 2023–2025 Toyota Sequoia 4WD covers SR5, Limited, Platinum, Capstone, and 1794 Edition applications listed in the fitment section. The box holds an N3 shock pair, (2) upper control arms with rubber bushings, (2) strut spacers, (2) differential spacers, a skid plate, and hardware up front, plus (2) coil spring spacers and a track bar relocation bracket to keep the rear axle centered. Rough Country lists the job as bolt-on with no cutting or drilling and an install time of 4-6 hours. Check the exclusions, then work from the downloadable installation guide.
What’s in the box
Kit contents
- 1× 3.5in Kit Box 70330991
- 1× Skid Plate Kit Box 70300BOX2
- 1× N3 Shock Pair 23328
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 70330_A kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 70330_A |
| UPC / GTIN | 00840269939013 |
| Lift height | 3.5 in |
| Shock package | N3 series |
| Shipping weight | 81 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch