4.5-Inch Lift Kit with Vertex Coilovers for Ford F-250 4WD (2011–2014)
- Fits 2011–2014 Ford F-250 Super Duty 4WD, including XL, XLT, Lariat, King Ranch, and Platinum trims
- Does not fit F-350, gas engine, or dually trucks — check your configuration first
- Trucks with a 2-piece rear driveshaft also need carrier-bearing drop bracket SKU 1197
- Kit contents: Vertex 2.5 adjustable front coilovers (left and right), V2 monotube shock pair, coilover conversion hardware, 4.5-inch block and U-bolt kit with
- Bolt-on installation with radius arm drop brackets for corrected caster; downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Dually models
Does NOT F-350 models. A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197 Fitment on this page is based on the manufacturer’s application data.
About this kit
4.5-Inch Lift Kit with Vertex Coilovers, fitment-checked
Rough Country 53058 is a 4.5-inch lift kit for 2011–2014 Ford F-250 Super Duty 4WD trucks, built around adjustable Vertex 2.5 front coilovers, a V2 monotube shock pair, and a fabricated rear block and U-bolt package without overloads. It does not fit F-350, gas engine, or dually trucks. Shipping weight: 215 lb.
This 4.5-inch lift kit for the 2011–2014 Ford F-250 Super Duty 4WD replaces the front with left and right Vertex 2.5 adjustable coilovers and pairs them with a V2 monotube shock set out back. Radius arm drop brackets bring caster back into the factory range, and the fabricated rear blocks are shaped to resist axle wrap. Confirm your truck before ordering: F-350, gas engine, and dually applications are excluded, and a 2-piece rear driveshaft calls for a separate carrier-bearing drop bracket, Rough Country SKU 1197.
What’s in the box
Kit contents
- 1× V2 MONOTUBE SHOCK PAIR 760762-2
- 1× 4.5" Kit Box 50011991
- 1× Box Kit 1563BOX1
- 1× 4.5 In Block U-Bolt Kit No Overloads 1563BOX4
- 1× Vertex 2.5 Adj FR Lh 4.5IN-6.IN 685042L
- 1× Vertex 2.5 Adj FR Rh 4.5IN-6.IN 685042R
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 53058 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 53058 |
| UPC / GTIN | 00840269919497 |
| Lift height | 4.5 in |
| Shock package | Vertex series |
| Shipping weight | 215 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here