4.5-Inch Vertex Lift Kit for F-250 Super Duty 4WD (2015–2016)
- Fits 2015–2016 Ford F-250 Super Duty 4WD — King Ranch, Lariat, Platinum, XL, and XLT
- Does not fit F-350, gas engine, or dually models
- Trucks with a 2-piece rear driveshaft require a carrier-bearing drop bracket (SKU 1197)
- Kit contents: Vertex 2.5 adjustable front coilovers (LH/RH), V2 monotube shock pair, rear block and U-bolt kit, box kit hardware
- Bolt-on install with radius arm drop brackets for correct caster; downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Dually models
Does NOT F-350 models. A carrier-bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. SKU: 1197. Fitment on this page is based on the manufacturer’s application data.
About this kit
4.5-Inch Vertex Lift Kit, fitment-checked
Rough Country 53458 is a 4.5-inch lift kit for the 2015–2016 Ford F-250 Super Duty 4WD in King Ranch, Lariat, Platinum, XL, and XLT trims. The kit pairs Vertex 2.5 adjustable front coilovers with a V2 monotube shock pair, fabricated rear blocks, and a U-bolt kit. It does not fit F-350, gas engine, or dually trucks.
This 4.5-inch lift kit for the 2015–2016 Ford F-250 Super Duty 4WD arrives as a coilover conversion: left- and right-hand Vertex 2.5 adjustable front units, a V2 monotube shock pair, a rear block and U-bolt kit without overloads, and the model-specific box kit hardware. Radius arm drop brackets set caster so steering behavior stays close to factory. Read the exclusions first — F-350, gas engine, and dually trucks are out, and trucks with a 2-piece rear driveshaft need a separate carrier-bearing drop bracket, SKU 1197. A downloadable installation guide is available covering both kit and coilover steps.
What’s in the box
Kit contents
- 1× V2 MONOTUBE SHOCK PAIR 760762-2
- 1× 4.5" Kit Box 50011991
- 1× 4.5 In Block U-Bolt Kit No Overloads 1563BOX4
- 1× Box Kit 1567BOX1
- 1× Vertex 2.5 Adj FR Lh 4.5IN-6.IN 685042L
- 1× Vertex 2.5 Adj FR Rh 4.5IN-6.IN 685042R
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 53458 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 53458 |
| UPC / GTIN | 00840269919442 |
| Lift height | 4.5 in |
| Shock package | Vertex series |
| Shipping weight | 212 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here