6-Inch Lift Kit with V2 Shocks for Ford Super Duty 4WD (2017–2022) — Part 50770
- Fits 2017–2022 Ford F-250 and F-350 Super Duty 4WD — check the full exclusion list below
- Does not fit gas engine, manual shift transfer case, dually, or Tremor factory trim package trucks
- Kit includes upper and lower arm boxes, 6-inch coil box, 4.5-inch block U-bolt kit, transfer case clocking kit, and two V2 monotube shock pairs
- Fabricated rear blocks take the place of the factory lift block
- Downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Manual shift transfer cases Does NOT fit dually models
New fabricated lift block replaces the factory equipped lift block. Does NOT work on models equipped with Tremor Factory Trim Package Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with V2 Shocks, fitment-checked
Rough Country 50770 is a 6-inch lift kit for 2017–2022 Ford F-250 and F-350 Super Duty 4WD models, built around upper and lower radius arm components, a coil box, fabricated rear blocks with U-bolts, a transfer case clocking kit, and two pairs of V2 monotube shocks. It does not fit gas engine models, manual shift transfer cases, dually models, or trucks with the Tremor factory trim package.
This 6-inch lift kit for the 2017–2022 Ford F-250 and F-350 Super Duty 4WD covers XL, XLT, Lariat, King Ranch, Platinum, and Limited trims listed in the fitment section. Radius arm drop brackets let you set caster back where the factory geometry wants it, and the fabricated rear blocks replace the original lift block while addressing axle wrap. Confirm your engine, transfer case shift type, rear axle, and trim against the exclusion list first, then work from the downloadable Rough Country installation guide before you start.
What’s in the box
Kit contents
- 1× 4.5-6in Up Arm Kit 1560BOX2
- 1× 4.5-6in Lower Arms 1560BOX3
- 1× 6 Inch Coil Box 9296
- 1× 4.5 In Block U-Bolt Kit No Overloads 1563BOX4
- 1× 56020 Box Kit 1560BOX1
- 1× Univ. 3 4 X 4 1 X 1 2in U-Bolt Kit 7673
- 1× Transfer Case Clocking Kit 55003
- 1× V2 MONOTUBE SHOCK PAIR 760754-3
- 1× V2 MONOTUBE SHOCK PAIR 760805-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 50770 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 50770 |
| UPC / GTIN | 00843030161941 |
| Lift height | 6 in |
| Shipping weight | 306.76 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here