6-Inch Lift Kit with V2 Shocks for Ford Super Duty 4WD (2017-2022) for Trucks without Overloads
- Fits 2017-2022 Ford F-250 and F-350 Super Duty 4WD in King Ranch, Lariat, Limited, Platinum, XL, and XLT trims
- Not for gas engines, manual-shift transfer cases, dually axles, or Tremor Factory Trim Package trucks
- Kit includes 4.5-6in upper and lower arms, 6-inch coil box, transfer case clocking kit, and two V2 monotube shock pairs
- Fabricated 4.5-inch rear blocks replace the factory blocks and address axle wrap
- Bolt-on installation — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Manual shift transfer cases Does NOT fit dually models
New fabricated lift block replaces the factory equipped lift block. Does NOT work on models equipped with Tremor Factory Trim Package Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with V2 Shocks for Ford Super Duty 4WD (2017-2022), fitment-checked
Rough Country 52670 is a 6-inch lift kit for 2017-2022 Ford F-250 and F-350 Super Duty 4WD models, built around a four-link front setup with radius arm drop brackets and two pairs of V2 monotube shocks. Diesel 4WD single-rear-wheel trucks only: it does not fit gas engines, manual-shift transfer cases, dually axles, or trucks with the Tremor Factory Trim Package.
This 6-inch lift kit for the 2017-2022 Ford F-250 and F-350 Super Duty 4WD covers XL through Limited trims, including King Ranch, Lariat, Platinum, and XLT. The boxed kit carries upper and lower 4.5-6in arm assemblies, a 6-inch coil box, a 4.5-inch fabricated block and U-bolt package for trucks without overloads, a transfer case clocking kit, hardware box, and two V2 monotube shock pairs. Drop brackets set caster back where the factory geometry wants it. Confirm engine, transfer case, and axle configuration against the exclusion list, then work from the downloadable Rough Country installation guide.
What’s in the box
Kit contents
- 1× 4.5-6in Up Arm Kit 1560BOX2
- 1× 4.5-6in Lower Arms 1560BOX3
- 1× 6 Inch Coil Box 9296
- 1× 4.5 In Block U-Bolt Kit No Overloads 1563BOX4
- 1× 56020 Box Kit 1560BOX1
- 1× Transfer Case Clocking Kit 55003
- 1× V2 MONOTUBE SHOCK PAIR 760754-3
- 1× V2 MONOTUBE SHOCK PAIR 760805-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 52670 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 52670 |
| UPC / GTIN | 00843030161897 |
| Lift height | 6 in |
| Shipping weight | 289.85 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here