6-Inch Vertex Coilover Lift Kit for Ford Super Duty 4WD (2017-2022) with V2 Monotube Rear Shocks
- Fits 2017-2022 Ford F-250 and F-350 Super Duty 4WD — check the full fitment list before ordering
- Vertex 2.5 adjustable front coilovers (left and right) plus a V2 monotube rear shock pair
- Kit also includes a front diesel CV driveshaft, upper and lower arm kits, and a fabricated block with U-bolts
- Does not fit gas engine, dually, manual shift transfer case, or Tremor Factory Trim Package models
- 10-speed transmission trucks require removing the dial pin — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Manual shift transfer cases Does NOT fit dually models
Models equipped with a 10-speed transmission must remove dial pin. New fabricated lift block replaces the factory equipped lift block. Does NOT work on models equipped with Tremor Factory Trim Package. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Vertex Coilover Lift Kit, fitment-checked
Rough Country 56058 is a 6-inch lift kit for 2017-2022 Ford F-250 and F-350 Super Duty 4WD diesel models. The kit pairs Vertex 2.5 adjustable front coilovers with a V2 monotube rear shock pair, a front CV driveshaft, radius arm drop brackets, and a fabricated rear block with U-bolts. It does not fit gas engine, dually, manual shift transfer case, or Tremor Factory Trim Package trucks.
This 6-inch lift kit for the 2017-2022 Ford F-250 and F-350 Super Duty 4WD covers XL, XLT, Lariat, King Ranch, Platinum, and Limited trims in the fitment section. Front height comes from Vertex 2.5 adjustable coilovers, with a V2 monotube pair and a fabricated rear block replacing the factory block out back. Radius arm drop brackets keep caster where the steering wants it. Diesel trucks only — gas engine, dually, manual shift transfer case, and Tremor Factory Trim Package models are excluded. Trucks with the 10-speed transmission require removal of the dial pin. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× CV Drive Shaft 5068.1
- 1× V2 MONOTUBE SHOCK PAIR 760805-2
- 1× 6" Kit Box 50010991
- 1× 6.5 In Block U-Bolt Kitoverloads 1550BOX2
- 1× 56020 Box Kit 1560BOX1
- 1× 4.5-6in Up Arm Kit 1560BOX2
- 1× 4.5-6in Lower Arms 1560BOX3
- 1× Vertex 2.5 Adj FR Lh 4.5IN-6.IN 685042L
- 1× Vertex 2.5 Adj FR Rh 4.5IN-6.IN 685042R
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 56058 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 56058 |
| UPC / GTIN | 00840269914683 |
| Lift height | 6 in |
| Shock package | Vertex series |
| Shipping weight | 329 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here