6-Inch Lift Kit with N3 Shocks for Ford F-250 4WD (2011–2014)
- Fits 2011–2014 Ford F-250 Super Duty 4WD in XL, XLT, Lariat, King Ranch, and Platinum trim
- Does not fit F-350, gas-engine, or dually models; requires rear factory contact overload springs
- Kit contents: 6-inch upper and lower arm boxes, 6-inch front coils, block and U-bolt kit, and an N3 shock kit
- Fabricated rear lift blocks take over from the factory block; radius arm drop brackets set proper caster
- Bolt-on installation — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Gas engine models
- Dually models
Does NOT F-350 models. ONLY fits models equipped with rear factory contact overload springs New fabricated lift block replaces the factory equipped lift block. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 565.20 is a 6-inch lift kit for the 2011–2014 Ford F-250 Super Duty 4WD, built around radius arm drop brackets, fabricated rear blocks, and application-valved N3 shocks. It fits only diesel models equipped with rear factory contact overload springs, and it does not cover F-350, gas-engine, or dually trucks.
This 6-inch lift kit for the 2011–2014 Ford F-250 Super Duty 4WD arrives as a boxed kit: upper and lower radius arms, front coils, an N3 shock set, and a fabricated block and U-bolt package that takes the place of the factory block. The drop brackets let caster be set correctly so the truck keeps its stock steering feel, and the rear blocks are shaped to limit axle wrap. Confirm your truck has rear factory contact overload springs, then work from the downloadable Rough Country installation guide before you start.
What’s in the box
Kit contents
- 1× 6in Up Arm Kit 1580 BOX 1
- 1× 6in Lower Arms 1580 BOX 2
- 1× 6in D-Coil 9295
- 1× Block U-Bolt Kitoverloads 1564BOX3
- 1× Box Kit 1565BOX1
- 1× N3 Shock Kit 158030
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 565.20 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 565.20 |
| UPC / GTIN | 00843030129309 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 269 lb |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here