7.5-Inch Vertex Lift Kit for Silverado/Sierra HD (2011-2019)
- Fits supported 2011-2019 Chevrolet Silverado / GMC Sierra 2500 HD and 3500 HD, 4WD and RWD — check the full fitment list
- Does not fit dually trucks or trucks with Magnetic Ride Control
- Factory wheels will not work; with factory 17-inch wheels, aftermarket wheels must be 17 inches or larger for caliper and rotor clearance
- Kit contents include Vertex 2.5 front and rear shocks, crossmember, knuckles, and rear lift hardware
- Overload-spring trucks need u-bolt kit 7664; torsion bar removal tool 1067 recommended
- Minor cutting and drilling required — downloadable installation guide available. Shipping weight: 343.75 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
+ 1 more applications
✕ Does not fit
- Dually models
- Models with Magnetic Ride Control
Does NOT work with factory wheels. If equipped with factory 17" wheels - new aftermarket wheels must be 17" or larger to clear brake calipers/rotor. Gas models may require modification to the exhaust for driveshaft clearance Models equipped with factory rear overload springs require longer U-bolt kit (7664) - available below. Fitment on this page is based on the manufacturer’s application data.
About this kit
7.5-Inch Vertex Lift Kit, fitment-checked
Rough Country 25350 is a 7.5-inch lift kit for supported 2011-2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks in 4WD or RWD, built around a set of Vertex 2.5 front and rear shocks. Factory wheels will not clear it, and dually and Magnetic Ride Control trucks are outside the fitment. Some cutting and drilling is part of the job.
This 7.5-inch lift kit for the 2011-2019 Silverado and Sierra 2500 HD and 3500 HD (plus the 2015 Silverado 3500 RWD WT listed in fitment) ships as a boxed assembly: crossmember, main kit and rear kit boxes, a no-touch-differential bracket box, driver and passenger knuckles, and two pairs of Vertex 2.5 shocks front and rear. Plan on minor cutting and drilling. Trucks with factory rear overload springs need the longer u-bolt kit, part 7664, and a torsion bar removal tool (1067) makes the front end easier. Gas trucks may need exhaust work for driveshaft clearance. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Crossmember Box 10130BOX3
- 1× 253x Kit Box 1253BOX6
- 2× Vertex 2.5 FR 5.0in-7.5in NTD Shock 685776
- 2× Vertex 2.5 RR 3.5-7.5 In 695744
- 1× 5-7in Kit Box 10430BOX1
- 1× 7in RR Kit Box 1253BOX11
- 1× NTD Bracket Box 1253BOX13
- 1× Dr Knuckle 1253BOX1
- 1× Pass Knuckle 1253BOX2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 25350 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 25350 |
| UPC / GTIN | 00843030198022 |
| Lift height | 7.5 in |
| Shock package | Vertex series |
| Shipping weight | 343.75 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here