Onboard Air Bag Compressor Kit with Gauge
- Rough Country 12 volt compressor rated at 1.03 CFM
- Duty cycle 9% at 100 PSI; recommended maximum working pressure 120 PSI
- Compressor measures 7 in. long by 2.75 wide by 5 in. high
- Moisture and dust resistant, with DOT approved air lines
- Low-pressure sensor included to maintain bag inflation
- Gauge, wiring and airline included to tie into an existing airbag kit
About this part
Onboard Air Bag Compressor Kit with Gauge, fitment-checked
A 12 volt onboard compressor rated at 1.03 CFM, supplied with a gauge and the wiring and airline needed to tie into an air spring kit you already have. Duty cycle is 9% at 100 PSI with a recommended maximum working pressure of 120 PSI. A low-pressure sensor is included to hold bag inflation.
This is the part that turns a manual air spring setup into one you adjust from the cab. The compressor itself is a 12 volt unit flowing 1.03 CFM, built to resist moisture and dust since it lives underneath rather than inside. Duty cycle is 9% at 100 PSI and the recommended maximum working pressure is 120 PSI, so it is sized for periodic adjustment rather than continuous running. A low-pressure sensor keeps the bags from sagging. DOT approved air lines, the gauge and all the wiring come with it, and install is quoted at 2-3 hours.
Specifications
Specs
| Brand | Rough Country |
| Part number | 10100 |
| UPC / GTIN | 00843030108410 |
| Shipping weight | 7 lb |
| Country of origin | CN |
| Category | Recovery & Winches › Air Compressors |
| Installation guide | Downloadable PDF |
Why buy here