1.75-Inch Leveling Kit for Toyota Tundra (2022-2025)
- Fits 2022-2025 Toyota Tundra, 4WD and RWD, SR through Capstone
- 1.75 inches of front lift with no differential modification
- Strut springs must be compressed to rotate the top hat during install
- Excludes Pro Series, XSP-X, and Adaptive Variable Suspension (AVS) models
- Estimated install time 2-3 hours; downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 1 verified tire size for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models
- XSP-X models
- Models equipped with Adaptive Variable Suspension (AVS) system
Strut springs will need to be compressed to rotate the top hat for installation. Fitment on this page is based on the manufacturer’s application data.
About this kit
1.75-Inch Leveling Kit, fitment-checked
Front strut spacers that raise a 2022-2025 Toyota Tundra by 1.75 inches without touching the differential. Read the install note first: the strut springs have to be compressed so the top hat can be rotated, which is more involved than a stack-on-top spacer. Not for Pro Series, XSP-X, or trucks with Adaptive Variable Suspension (AVS).
On the 2022-2025 Tundra the spacer still adds 1.75 inches at the front and still leaves the differential and drivetrain alone, but the install is not a simple stack-on-top job: the strut springs have to be compressed so the top hat can be rotated into position. Worth knowing before you commit a weekend to it. Rough Country puts the job at 2-3 hours. Trims from SR through Capstone and the 1794 Edition are covered, while Pro Series, XSP-X, and Adaptive Variable Suspension trucks fall outside the fitment.
What’s in the box
Kit contents
- 1× 1.75 Inch Leveling Kit 88000$99.95
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 88000_A kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 88000_A |
| UPC / GTIN | 00840269903045 |
| Lift height | 1.75 in |
| Shipping weight | 3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
2 Inch
3 Inch
3 Inch
1.75 Inch
3 Inch
3 Inch
1.75 Inch
2.5 Inch