1.75-Inch Leveling Kit for Toyota Tundra (2007-2021)
- Raises the front of the truck 1.75 inches to level the factory rake
- Fits 2007-2021 Toyota Tundra in both 4WD and RWD
- No differential spacing or drivetrain modification required
- Pro Series and XSP-X models excluded
- Estimated install time 2-3 hours; downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 3 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models Does NOT fit XSP-X models
About this part
1.75-Inch Leveling Kit, fitment-checked
A modest 1.75 inches of front lift for the 2007-2021 Toyota Tundra — enough to pull the rake out without pushing the front geometry far enough to need differential spacers. Upper strut extensions and hardware are all that ship. Pro Series and XSP-X models are excluded. Rough Country estimates 2-3 hours.
Not every Tundra needs three inches up front. At 1.75 inches this kit clears the factory rake and opens up a little tire room while staying inside the range where the front differential and CV axles keep working at their original angles, so there are no diff spacers, skid plate spacers, or extra brackets to fit. That keeps the parts count low and the install short: upper strut extensions and hardware, roughly 2-3 hours of driveway time. Fitment covers 2007 through 2021 Tundra in 4WD and RWD, minus Pro Series and XSP-X trucks.
Specifications
Specs
| Brand | Rough Country |
| Part number | 88000 |
| UPC / GTIN | 00843030151980 |
| Lift height | 1.75 in |
| Shipping weight | 3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
2 Inch
3 Inch
3 Inch
1.75 Inch
3 Inch
3 Inch
1.75 Inch
2.5 Inch