3.5-Inch Lift Kit with Vertex 2.5 and V2 Shocks for Silverado 1500 — Part 12157
- Adjustable Vertex 2.5 front shocks with a V2 monotube rear pair
- 3.5-inch knuckle lift for 2014–2019 Chevy Silverado 1500 and GMC Sierra 1500 4WD
- Knuckles machined for stamped steel and aluminum lower control arms
- Excludes Denali, Denali Ultimate, and eAssist (ECO Hybrid) trucks
- Cutting and grinding required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
+ 1 more applications
✕ Does not fit
- Denali or Denali Ultimate models
- Models with eAssist (ECO Hybrid) package
Requires cutting and grinding. Does NOT work with aftermarket control arms. New lift block replaces the factory-equipped block. To ensure proper fit please confirm if the stock control arms are cast aluminum cast steel or stamped steel. For a visual please click here. To ensure adequate clearance when lowering the differential models equipped with a mass damper on the front differential must be removed. To retain factory wheels a 0.25" wheel spacer will be required SKU: 1065. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with Vertex 2.5 and V2 Shocks, fitment-checked
Adjustable Vertex 2.5 shocks at the front, a V2 monotube pair at the rear, and 3.5 inches of knuckle lift for 2014–2019 Chevy Silverado 1500 and GMC Sierra 1500 4WD trucks. Knuckles are cut for stamped steel and aluminum lower control arms. Denali, Denali Ultimate, and eAssist trucks do not fit, and the install requires cutting and grinding.
A 3.5-inch lift kit for the 2014–2019 Chevy Silverado 1500 and GMC Sierra 1500 4WD that mixes damping families: adjustable Vertex 2.5 shocks up front, a V2 monotube pair at the rear. Knuckles machined for stamped steel and aluminum lower control arms set the height rather than taller springs, so the front end stays close to factory geometry. Before ordering, confirm the lower control arm material and rule out Denali, Denali Ultimate, and eAssist trucks. Cutting and grinding are required, a downloadable installation guide is available, and factory wheels need a 0.25-inch spacer, part 1065.
What’s in the box
Kit contents
- 1× 3.5" Kit Box 12170BOX1
- 2× Vertex 2.5 Adj FR 3.5in 685130
- 1× 3.5in Stamped Steel & Aluminum Lca Knuckles 12130BOX1
- 1× V2 MONOTUBE SHOCK PAIR 760738-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 12157 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 12157 |
| UPC / GTIN | 00843030198602 |
| Lift height | 3.5 in |
| Shock package | Vertex series |
| Shipping weight | 157 lb |
| Country of origin | TH |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here