3.5-Inch Strut Lift Kit with Red Control Arms for Sierra 1500 4WD
- Red forged upper control arms, rated for 2.5 to 3.5 inches of lift
- Loaded 3.5-inch strut pair supplies the front lift
- Fits 2014–2016 Sierra 1500 and Silverado 1500 4WD; not for 2014–2016 Denali or eAssist
- Cutting and grinding required; stamped steel factory control arms not supported
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with factory stamped steel control arms
- 2014-2016 Denali models
- Models with eAssist (ECO Hybrid) package
Requires cutting and grinding. This kit fits models with both cast steel or aluminum factory control arms. Please use our 3.5" knuckle kit. To ensure proper fit please confirm if the stock control arms are cast aluminum cast steel or stamped steel. For a visual please click here. New lift block replaces the factory equipped block. To ensure adequate clearance when lowering the differential models equipped with a mass damper on the front differential must be removed. Models retaining factory wheels are advised to run no wider than a 11.5" wide tire. For additional clearance on models equipped with aggressive side wall tires or to retain factory wheels a 0.25" wheel spacer will be required SKU: 1065. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Strut Lift Kit with Red Control Arms, fitment-checked
Red forged upper control arms set this 3.5-inch 4WD kit apart from the standard version. A loaded 3.5-inch strut pair handles the front lift on 2014–2016 Sierra 1500 and Silverado 1500 trucks, and the arms are rated across a 2.5 to 3.5 inch lift range. Cutting and grinding are required, and stamped steel factory control arms are not supported.
The finish is the difference here — red forged upper control arms in place of the standard set, with the same pre-pressed ball joints and OEM-style rubber bushings underneath. The kit lifts 2014–2016 Sierra 1500 and Silverado 1500 4WD trucks 3.5 inches on a loaded strut pair, and a fabricated block replaces the factory rear block. Verify your factory control arm material first: cast steel and cast aluminum are supported, stamped steel is not. Cutting and grinding are required, and 2014–2016 Denali and eAssist models fall outside fitment.
What’s in the box
Kit contents
- 1× 12132 Strut Kit Box 12132BOX1
- 1× Loaded Strut Pair 501130
- 1× Red Forged Upper Control Arms 19401ARED
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 19432RED kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 19432RED |
| UPC / GTIN | 00840269940200 |
| Lift height | 3.5 in |
| Shipping weight | 106.3 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here