Pitman Arm for Ford F-250 & F-350 Super Duty 4WD (1999–2004)
- Fits 1999–2004 Ford F-250, F-250 Super Duty, and F-350 Super Duty in 4WD
- Sized for trucks running a 6in lift
- 1999 F-250 and F-350 models must be manufactured on or after 3/1/1999
- Keeps draglink alignment and turning radius correct after the lift goes in
- Install time: 2-3 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
ONLY fits 1999 F-250/350 models manufactured on or after 3/1/1999. Fitment on this page is based on the manufacturer’s application data.
About this part
Pitman Arm, fitment-checked
Built for 6in lifts on the 1999–2004 Ford F-250, F-250 Super Duty, and F-350 Super Duty in 4WD. One date qualifier matters: 1999 F-250 and F-350 trucks are only covered if they were manufactured on or after 3/1/1999, so verify the build date on a 1999 truck before ordering.
Super Duty steering geometry goes off plan once the truck sits on a 6in lift, and this pitman arm pulls the draglink back into line on 1999–2004 Ford F-250, F-250 Super Duty, and F-350 Super Duty 4WD trucks. Straightening that linkage holds the turning radius and settles the vibration a lifted truck sends back through the wheel. The one hard limit is on 1999 trucks: only those built on or after 3/1/1999 are covered. Set aside 2-3 hours and work from the downloadable Rough Country installation guide. Shipping weight: 5.0 lb.
Specifications
Specs
| Brand | Rough Country |
| Part number | 6611 |
| UPC / GTIN | 00843030112585 |
| Shipping weight | 5 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Control Arms & Track Bars |
Why buy here
The fitment-first store
Keep looking
More Control Arms & Track Bars
6 Inch
3 Inch
5.5 Inch
3 Inch
6 Inch
8.5 Inch
6 Inch