1.5-Inch Lift Kit with N3 Shocks for 2021–2025 Ford Bronco Sport AWD
- Fits compatible 2021–2025 Ford Bronco Sport AWD models. Check the fitment list for your trim
- Does not fit Badlands, First Edition, or Sasquatch Package models
- Kit contents: loaded N3 strut pair, rear coil springs, N3 shock pair, trailing arm drop spacers
- Bolt-on install using factory mounting locations: no cutting or drilling
- Rough Country install time: 3-4 hours; downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 1 verified tire size for this kit, with wheel width, bolt pattern and offset for each.
Will it fit your truck?
✓ Fits
✕ Does not fit
- Badlands edition
- First edition
1.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 40131 is a 1.5-inch lift kit for compatible 2021–2025 Ford Bronco Sport AWD models. The box carries a loaded N3 strut pair up front, rear coil springs, an N3 shock pair, and trailing arm drop spacers. It does not fit Badlands, First Edition, or Sasquatch Package trucks, which leave the factory with their own suspension setups.
This 1.5-inch lift kit for the 2021–2025 Ford Bronco Sport AWD raises both ends to take some rake out of the stance and open up room for a taller tire. Front lift comes from application-specific N3 loaded struts; the rear uses coil springs with trailing arm drop spacers and a matched N3 shock pair. Everything bolts to factory mounting points with no cutting or drilling, and Rough Country lists installation at 3-4 hours. Confirm your trim against the exclusion list first, then pull the downloadable installation guide before you start.
Kit contents
- 1× Loaded Strut Pair 501120$369.95
- 1× 2021 FORD BRONCO SPORT/ESCAPE REAR COIL 1.5IN 9442
- 1× N3 Shock Pair 23324
- 1× BRONCO SPORT 1.5" TRAILING ARM DROP BOX 40131BOX1
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 40131 kit fits the vehicles shown in the fitment section above.
Specifications
| Brand | Rough Country |
| Part number | 40131 |
| UPC / GTIN | 00840269911033 |
| Lift height | 1.5 in |
| Shock package | N3 series |
| Shipping weight | 75 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
More Lift Kits
1.5 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
4.5 Inch
4.5 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch
6 Inch