3.5-Inch M1 Lift Kit for Silverado/Sierra 1500 4WD (2007-2013)
- Fits 2007-2013 Chevrolet Silverado 1500 4WD and 2007-2013 GMC Sierra 1500 4WD/AWD — check the fitment list for submodels
- Kit contents: M1 loaded strut pair, M1 monotube shock pair, and red forged upper control arms for 2.5-3.5 inches of lift
- Will not work on trucks with factory stamped steel control arms, 2014-2016 Denali (Magnetic Ride Control), or eAssist hybrids
- Factory wheels: keep tire width to 11.5 inches or less; a 0.25 inch wheel spacer (SKU 1065) adds clearance
- Cutting and grinding required — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with factory stamped steel control arms
- 2014-2016 Denali models
- Models with eAssist (ECO Hybrid) package
Requires cutting and grinding. This kit fits models with both cast steel or aluminum factory control arms. Please use our 3.5" knuckle kit. To ensure proper fit please confirm if the stock control arms are cast aluminum cast steel or stamped steel. For a visual please click here. New lift block replaces the factory equipped block. To ensure adequate clearance when lowering the differential models equipped with a mass damper on the front differential must be removed. Models retaining factory wheels are advised to run no wider than a 11.5" wide tire. For additional clearance on models equipped with aggressive side wall tires or to retain factory wheels a 0.25" wheel spacer will be required SKU: 1065. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch M1 Lift Kit, fitment-checked
Rough Country 27740RED is a 3.5-inch lift kit for 2007-2013 Chevrolet Silverado 1500 and GMC Sierra 1500 4WD/AWD trucks, built around an M1 loaded strut pair, an M1 monotube shock pair, and red forged upper control arms rated for 2.5-3.5 inches of lift. Confirm whether your factory upper control arms are cast aluminum or cast steel first — trucks with stamped steel arms need the 3.5-inch knuckle kit instead. Cutting and grinding are part of the job.
This 3.5-inch lift kit for the 2007-2013 Silverado 1500 4WD and 2007-2013 Sierra 1500 4WD/AWD (Sierra listings also cover 2010-2013 SLE and SLT) pairs M1 valving front and rear with red forged upper control arms and a fabricated steel rear block that takes the place of the factory block. Differential drop hardware keeps front axle angles in check. It does not cover stamped steel control arm trucks, 2014-2016 Denali models with Magnetic Ride Control, or eAssist hybrid packages, and a front differential mass damper must come off during the build.
What’s in the box
Kit contents
- 1× 3.5" Kit Box 12170BOX1
- 1× M1 Loaded Strut Pair 502084
- 1× M1 MONOTUBE SHOCK PAIR 770738P
- 1× Red Forged Upper Control Arms 19401ARED
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 27740RED kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 27740RED |
| UPC / GTIN | 00840269940361 |
| Lift height | 3.5 in |
| Shock package | M1 series |
| Shipping weight | 105 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here