
4-Inch Lift Kit with N3 Shocks for Scout II 4WD (1974–1980)
- Fits 1974–1980 International Scout II 4WD — Base, SS2, Terra, Traveler, and XLC
- Front and rear lifted leaf springs, U-bolts, and hardware, plus two N3 shock pairs
- 4 inches of lift for added ground clearance and a level front-to-rear stance
- Bolt pattern 5x5.5 — tire and wheel combinations listed run up to 33x12.50R20
- Install time: 6-8 hours
The Trail Fortress check
Will it fit your truck?
✓ Fits
About this kit
4-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 82530 is a 4-inch lift kit for the 1974–1980 International Scout II 4WD, covering Base, SS2, Terra, Traveler, and XLC. Front and rear lifted leaf springs, U-bolts, and hardware go in the box along with two N3 shock pairs, so the truck gains ground clearance and sits level front to rear.
This 4-inch lift kit for the 1974–1980 International Scout II 4WD replaces the leaf springs at both ends rather than stacking on top of the factory pack: two front springs, two rear springs, a U-bolt set, and hardware, plus two N3 shock pairs to match the new ride height. The added height brings ground clearance up and takes the factory nose-down rake out of the stance. Rough Country lists this job at 6-8 hours, so plan a full weekend day in the driveway. Shipping weight is 208.0 lb.
What’s in the box
Kit contents
- 1× U-Bolts 7537
- 2× 4in Front Leaf Spring 8045
- 2× 4in Rear Leaf Spring 8046
- 1× N3 Shock Pair 23269
- 1× N3 Shock Pair 23212
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 82530 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 82530 |
| UPC / GTIN | 00843030145880 |
| Lift height | 4 in |
| Shock package | N3 series |
| Shipping weight | 208 lb |
| Country of origin | ID |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here