5-Inch Lift Kit with N3 Shocks for 2000–2002 Dodge Ram 2500 4WD
- Fits 2000–2002 Dodge Ram 2500 4WD — not for V8 gas engine, dually, or third-generation new-body trucks
- Kit contents: 5in diesel coils, 5.75 RR block, drop bracket box kit, add-a-leaf spring kit, and N3 shock kit
- Control arm drop brackets bolt on without welding; factory steering angles are kept
- Clears tires up to 35x12.50R20 on factory 17-inch and 20-inch wheels (8x6.5/8x165.1 bolt pattern)
- Cutting and drilling required; install time listed at 8-10 hours with a downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- V8 GAS engine models
- Dually models
- 3rd Generation new body models
Requires cutting and drilling. Models equipped with factory overload springs will need to have the overload removed for the new block and U-bolt kit On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 35330 is a 5-inch lift kit for the 2000–2002 Dodge Ram 2500 4WD. The kit pairs lifted diesel coil springs and lower control arm drop brackets up front with rear lift blocks, add-a-leafs, and a set of N3 shocks. It does not fit V8 gas engine trucks, dually axles, or third-generation new-body models, and the install calls for cutting and drilling.
This 5-inch lift kit for the 2000–2002 Dodge Ram 2500 4WD raises the front on lifted coil springs with lower control arm drop brackets, a pitman arm, and track bar and sway-bar drop brackets; the rear uses fabricated 4-inch lift blocks, add-a-leafs, and U-bolts, with N3 shocks at all four corners. The bracketry bolts in, so no welding is needed, and factory steering geometry is retained. Trucks with factory overload springs need the overload taken off before the new block and U-bolt hardware goes on. Rough Country lists an install time of 8-10 hours, and a downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 5.75 RR Block 6590
- 1× 5in Diesel Coils 9287
- 1× N3 Shock Kit 139430
- 1× Drop Bracket Box Kit 1353.2
- 1× Add-A-Leaf Spring Kit 6109
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 35330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 35330 |
| UPC / GTIN | 00843030147297 |
| Lift height | 5 in |
| Shock package | N3 series |
| Shipping weight | 224 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here