6-Inch Lift Kit for 2020–2023 Jeep Gladiator 4WD
- Fits 2020–2023 Jeep Gladiator 4WD, Rubicon and non-Rubicon trims — see the full fitment list
- Does not fit the 3.0L EcoDiesel V6, or Mojave models with FOX 2.5 shocks
- Kit contents: 6-inch front and rear coil springs, front CV driveshaft, front control arm relocation kit
- Shock options are configurable: N3, M1 monotube, or M1R remote reservoir
- Downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.0L EcoDiesel V6 motor
- Mojave models equipped with FOX 2.5 shocks which use a larger shock bolt incompatible with our replacement shocks
About this kit
6-Inch Lift Kit, fitment-checked
Rough Country 91230 is a 6-inch lift kit for 2020–2023 Jeep Gladiator 4WD models, from Sport and Willys through Rubicon and the 80th Anniversary trim. The kit ships with front and rear coil springs, a front CV driveshaft, and a front control arm relocation kit. It does not fit Gladiators with the 3.0L EcoDiesel V6, or Mojave models running FOX 2.5 shocks.
This 6-inch lift kit for the 2020–2023 Jeep Gladiator 4WD covers Rubicon and non-Rubicon trims listed in the fitment section, including Overland, High Altitude, Texas Trail, Freedom, and Launch Edition. The box holds 6-inch front and rear coil springs, a replacement front CV driveshaft to hold driveline angles at ride height, a front control arm relocation kit, and front sway bar disconnects for articulation. Shock choice is configurable — N3, M1 monotube, or M1R remote reservoir. Confirm your engine and shock setup against the exclusions first, then work from the downloadable Rough Country installation guide.
What’s in the box
Kit contents
- 1× CV Drive Shaft 5093.1A
- 1× 6in RR Coil Springs 9419
- 1× 6in FR Coil Springs 9418
- 1× Control Arm Relocation Kit 110602
- 1× 6in Kit Box 91230BOX2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 91230 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 91230 |
| UPC / GTIN | 00843030187941 |
| Lift height | 6 in |
| Shipping weight | 187.27 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here