3-Inch Lift Kit for Early Ford Bronco 4WD (1966-1977)
- 3 in. of lift on the 1966-1977 Ford Bronco Wagon
- Front coil springs and rear add-a-leafs
- Caster correction required, not included
- Part CB477 specified for 76-77 models
The Trail Fortress check
Will it fit your truck?
✓ Fits
3 in. Lift; Incl. Front Coil Springs; Rear Add-A-Leafs; Castor Correction Required Use PN[CB477} On 76-77 Models~Caster Correction Required Use PN[CB400] Front Coil Springs; Rear Add-A-Leafs; Castor Correction Required Use PN[CB477} On 76-77 Models~Caster Correction Required Use PN[CB400]~Caster Correction Required Use PN[CB477] Fitment on this page is based on the manufacturer’s application data.
About this kit
3-Inch Lift Kit, fitment-checked
Read the caster note before ordering: correction is required, and on 76-77 models Skyjacker specifies part CB477 to do it. The kit itself gives 3 in. with front coil springs and rear add-a-leafs on the 1966-1977 Bronco Wagon.
Lifting a solid-axle Bronco rotates the axle and takes the caster angle with it, which shows up as vague or heavy steering. Skyjacker is explicit that caster correction is required with this kit rather than optional, and names part CB477 for the 76-77 models. Budget for it. The kit itself brings front coil springs and rear add-a-leafs for 3 in. on the 1966-1977 Bronco Wagon. 50 lb boxed. This is the taller of Skyjacker's two early-Bronco kits.
Specifications
Specs
| Brand | Skyjacker |
| Part number | 172EBK |
| UPC / GTIN | 00803696103426 |
| Lift height | 3 in |
| Shipping weight | 50 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here
The fitment-first store
Keep looking
More Lift Kits
3.5 Inch
2 Inch
5 Inch
2 Inch
2 Inch
6 Inch
4 Inch
4 Inch
4 Inch
2.5 Inch
2.5 Inch
4 Inch
2.5 Inch
2 Inch