1.75-Inch Leveling Kit for Toyota Sequoia (2023-2025)
- Fits 2023-2025 Toyota Sequoia 4WD, SR5 through Capstone
- 1.75-inch front lift using upper strut extensions and hardware
- No differential spacing or drivetrain modification
- Not for Pro Series or Adaptive Variable Suspension (AVS) models
- Estimated install time 2-3 hours; downloadable installation guide available
Check tire fit for this kit → The manufacturer publishes 2 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Pro Series models
- Models equipped with Adaptive Variable Suspension (AVS) system
About this kit
1.75-Inch Leveling Kit, fitment-checked
The Sequoia application of Rough Country's 1.75-inch front leveling kit, covering 2023-2025 4WD models in SR5, Limited, Platinum, Capstone, and 1794 Edition trim. Upper strut extensions and hardware are all it takes — no differential spacing and no drivetrain work. Pro Series and Adaptive Variable Suspension models are excluded.
Sequoias carry a nose-down rake from the factory much like their pickup counterpart, and 1.75 inches of upper strut extension is enough to square the stance and open a little room for a taller tire. Nothing downstream needs adjusting: the differential stays where Toyota put it, and factory ride quality carries through because the struts themselves are untouched. Coverage is 2023-2025 4WD Sequoia. Trucks equipped with Adaptive Variable Suspension are not supported, nor are Pro Series models. Plan on 2-3 hours and pull the downloadable installation guide first.
What’s in the box
Kit contents
- 1× 1.75 Inch Leveling Kit 88000$99.95
Priced components are sold separately here, so a worn shock or arm can be replaced on its own later.
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 88000_B kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 88000_B |
| UPC / GTIN | 00840269937330 |
| Lift height | 1.75 in |
| Shipping weight | 3 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Leveling Kits |
Why buy here
The fitment-first store
Keep looking
More Leveling Kits
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2.5 Inch
2 Inch