3.5-Inch Lift Kit with Forged Upper Control Arms for Tahoe and Yukon
- 3.5 inches of lift from forged aluminum upper control arms with pre-installed POM ball joints
- Fits 2021–2026 Tahoe, Suburban, Yukon, and Yukon XL 4WD
- Wheels must be 20in or larger; minor trimming required
- Not for AT4, Premier, High Country, Magnetic Ride Control, or Adaptive Air Ride models
- Remove the front differential mass damper if fitted — downloadable install guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- AT4 Premier or High Country models
- Models with Adaptive Air Ride suspension found standard on Denali Ultimate models (optional upgrade on Denali)
- Models equipped with Magnetic Ride Control (optional upgrade on RST and Z71 models)
Minor trimming is required. 20in or larger wheels are required. If vehicle is equipped with a mass damper on the front differential the damper must be removed. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with Forged Upper Control Arms, fitment-checked
Rough Country 11400 delivers 3.5 inches of lift on 2021–2026 Tahoe, Suburban, Yukon and Yukon XL 4WD using forged aluminum upper control arms with POM ball joints already pressed in. Minor trimming is part of the install, wheels must be 20in or larger, and any mass damper on the front differential has to come off. Magnetic Ride Control and Adaptive Air Ride trucks are excluded.
This 3.5-inch lift kit for the 2021–2026 Chevrolet Tahoe and Suburban, GMC Yukon and Yukon XL in 4WD is centered on forged aluminum upper control arms cut with laser precision and shipped with the ball joints already installed. The POM joints give the arm a wider range of motion and cut down the bench work. Plan on minor trimming during installation, 20in or larger wheels, and removal of the front differential mass damper if your truck has one. AT4, Premier, High Country, and any vehicle with Magnetic Ride Control or Adaptive Air Ride are excluded. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 11400 Kit Box 11400BOX1
- 1× Forged Upper Control Arms 29501
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 11400 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 11400 |
| UPC / GTIN | 00843030105808 |
| Lift height | 3.5 in |
| Shipping weight | 25.5 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here