5-Inch Radius Arm Lift Kit with N3 Shocks for Ram 3500 4WD
- Fits 2020-2024 Ram 3500 4WD diesel models, single and dual rear wheel
- Front kit: lifted coil springs, radius arms, track bar bracket, transmission crossmember, clocking ring, pitman arm, carrier bearing shims
- Rear kit: air bag spacers, track bar bracket, sway-bar links and hardware
- Application-valved N3 shocks included; install time listed at 6-8 hours
- Transfer case removal required for the clocking ring, plus minor cutting
- Excludes Power Wagon, cab and chassis, and 6.7L HO Turbo Diesel with the Aisin transmission. Shipping weight: 295.25 lb
Check tire fit for this kit → The manufacturer publishes 3 verified tire sizes for this kit, with wheel width, bolt pattern and offset for each.
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 'Power Wagon' models Fits single rear wheel and dual real wheel models
- Models with 6.7L HO Turbo Diesel with 6-speed Aisin Transmission
- Cab and chassis models
Requires removal of Transfer case for clocking ring install for correct front driveline geometry. Rear wheels may require additional dually wheel spacers to run 12.50in wide tire ONLY fits Diesel models Requires minor cutting. On vehicles equipped with a two piece driveshaft and carrier bearing as on the Mega Cab there is the potential for take off vibration depending on the severity this can be corrected with shimming down the carrier bearing. Fitment on this page is based on the manufacturer’s application data.
About this kit
5-Inch Radius Arm Lift Kit with N3 Shocks, fitment-checked
Rough Country 30930 is a 5-inch radius arm lift kit for 2020-2024 Ram 3500 diesel 4WD trucks in single and dual rear wheel form. Lifted coil springs, radius arms, a track bar bracket, transmission crossmember, clocking ring, pitman arm and N3 shocks are included, with rear air bag spacers and sway-bar links out back. Install time is listed at 6-8 hours.
Diesel Ram 3500 trucks from 2020-2024 in 4WD are the only fit for this 5-inch radius arm kit, and the transfer case has to come out so the clocking ring can go in and set front driveline geometry correctly. The front package covers lifted coil springs, radius arms with rubber bushings, a track bar bracket, a transmission crossmember, sway-bar brackets, a pitman arm and carrier bearing shims; the rear adds air bag spacers, a track bar bracket and sway-bar links. Application-valved N3 shocks control it. Power Wagon, cab and chassis, and 6.7L HO trucks with the Aisin transmission are excluded.
What’s in the box
Kit contents
- 1× Driver Radius Arm 1368996
- 1× Drw Box Kit 37530BOX1
- 1× Drw Shock Kit 37530BOX2
- 1× 5in Diesel 9463
- 1× DODGE 2019 RAM 3500 DRW TRANSFER CASE/CLOCKING RING BOX KIT 37530BOX4
- 1× DODGE 2019 RAM 3500 DRW W/ OE REAR AIR BAG BOX KIT 30930BOX2
- 1× Passenger Radius Arm 1368997
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 30930 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 30930 |
| UPC / GTIN | 00843030195502 |
| Shock package | N3 series |
| Shipping weight | 295.25 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here