6-Inch Factory-Wheel Lift Kit with N3 Shocks for Ram 1500
- Fits 2019-2024 Ram 1500 4WD, Tradesman through Limited Longhorn, including Rebel
- 22xl factory-wheel driver and passenger knuckles — the factory-wheel version of this lift
- Loaded 6-inch strut pair, N3 rear shock pair, and dual-rate rear coil springs
- Wheels 20 inches or larger; 18-inch and smaller will not clear
- Not for 1500 Classic, TRX, or 4-Corner Air-Suspension. Shipping weight: 288.55 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- 2019-2024 1500 Classic models
- Models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models
- TRX models
- 18" or smaller wheels
This package is an available upgrade across multiple sub-models. Kit is NOT recommended for AWD models due to pinion angle issues which cause drivetrain vibrations. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Factory-Wheel Lift Kit with N3 Shocks, fitment-checked
Rough Country 33931 is the factory-wheel variant of the 6-inch Ram 1500 lift: same loaded 6-inch strut pair, N3 rear shock pair, and dual-rate rear coils, but with 22xl factory-wheel driver and passenger knuckles. Fits 2019-2024 Ram 1500 4WD. Wheels must still be 20 inches or larger. 1500 Classic, TRX, and 4-Corner Air-Suspension trucks are excluded.
Choose this one when the truck is keeping its factory wheels: 33931 swaps in 22xl factory-wheel driver and passenger knuckles in place of the aftermarket-wheel parts, then lifts the 2019-2024 Ram 1500 4WD 6 inches on a loaded strut pair with an N3 rear shock pair and dual-rate rear coil springs. A crossmember box kit comes along to set the front geometry. The 20-inch wheel minimum still applies, and 18-inch and smaller wheels are out. Confirm the truck is not a 1500 Classic, a TRX, or fitted with 4-Corner Air-Suspension; AWD is not recommended. Shipping weight: 288.55 lb.
What’s in the box
Kit contents
- 1× Kit Box 334BOX1
- 1× N3 Shock Pair 23291
- 1× Crossmember Box Kit 33430BOX1
- 1× 22xl Factory Wheel Dr Knuckle 33930BOX1
- 1× 22xl Factory Wheel Ps Knuckle 33930BOX2
- 1× Loaded Strut Pair 501062
- 1× RR 6" Dual Rate 9425-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 33931 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 33931 |
| UPC / GTIN | 00843030189426 |
| Shock package | N3 series |
| Shipping weight | 288.55 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here