3.5-Inch Lift Kit with M1 Shocks for Ram 1500 2WD/4WD (2019-2026)
- Fits compatible 2019-2026 Ram 1500 2WD/4WD trims, including Rebel — check the exclusions before ordering
- Excludes 4-Corner air suspension trucks, TRX, and Warlock (1-inch factory lift) models
- Kit contents: 3.5-inch upper control arm and rear spacer box, M1 loaded strut pair, M1 monotube shock pair
- Forged aluminum upper control arms with POM ball joints already pressed in
- Bolt-on, no cutting or drilling; downloadable installation guide available
- Tire guidance: 11.5-inch max width on factory wheels; 0.25 wheel spacer (1065) for extra clearance. Shipping weight: 71.75 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models
- TRX models
- Warlock models
This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped click here. Tire and Wheel Details Models retaining factory wheels are advised to run no wider than an 11.5" wide tire. For additional clearance on models equipped with aggressive side wall tires a 0.25 wheel spacer is recommended SKU: #1065. Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with M1 Shocks, fitment-checked
Rough Country 31440RED is a 3.5-inch lift kit for compatible 2019-2026 Ram 1500 2WD/4WD trucks, built around forged aluminum upper control arms, an M1 loaded strut pair, and an M1 monotube shock pair. It does not fit trucks with 4-Corner air suspension, TRX models, or Warlock models. Bolt-on installation with no cutting or drilling.
This 3.5-inch lift kit for the 2019-2026 Ram 1500 2WD/4WD levels out the factory rake front to rear and opens up ground clearance for taller tires. The box carries a 3.5-inch upper control arm and rear spacer package, an M1 loaded strut pair, and an M1 monotube shock pair, with POM ball joints pre-installed in the forged aluminum arms. It bolts on with no cutting or drilling and can be reversed back to stock. Trucks keeping factory wheels should stay at or under an 11.5-inch tire width; a 0.25 wheel spacer (part 1065) adds clearance with aggressive sidewall tires.
What’s in the box
Kit contents
- 1× 3.5in Uca's & RR Spacer Box 31433991RED
- 1× M1 Loaded Strut Pair 502087
- 1× M1 MONOTUBE SHOCK PAIR 770800P
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 31440RED kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 31440RED |
| UPC / GTIN | 00840269940552 |
| Lift height | 3.5 in |
| Shock package | M1 series |
| Shipping weight | 71.75 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here