6-Inch Lift Kit with N3 Shocks for 2025 Ram 1500 4WD
- Fits 2025 Ram 1500 4WD, Tradesman and Express through Tungsten, including RHO and Rebel
- Loaded strut pair, N3 shock pair, dual-rate rear coil springs, and 2025-specific knuckles
- Does not work with factory 22-inch wheels due to hub sizing; requires 20-inch or larger wheels
- Excludes Warlock, which has a 1-inch factory lift, and 4-Corner Air-Suspension trucks
- Downloadable installation guide available. Shipping weight: 292.0 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models
- Warlock models
- 18" or smaller wheels
Due to differences in hub sizing this kit does NOT work on models equipped with factory 22" wheels. This package is an available upgrade across multiple sub-models. Kit is NOT recommended for AWD models due to pinion angle issues which cause drivetrain vibrations. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit with N3 Shocks, fitment-checked
Part number 88331 delivers 6 inches of lift on the 2025 Ram 1500 4WD, using a loaded strut pair, an N3 shock pair, dual-rate rear coil springs, and driver and passenger knuckles specific to the 2025 truck. Hub sizing rules out trucks with factory 22-inch wheels, and wheels must be 20 inches or larger. Warlock and 4-Corner Air-Suspension models are excluded.
Rough Country's 6-inch kit for the 2025 Ram 1500 4WD uses knuckles cut for the current truck rather than the earlier body, paired with a loaded strut pair, an N3 shock pair, dual-rate rear coil springs and a crossmember box kit. Coverage runs Tradesman and Express through Tungsten and Limited Longhorn, with RHO and Rebel on the list. Wheels are the gating item twice over: factory 22-inch wheels will not work because of hub sizing, and whatever you run has to be 20 inches or larger. Warlock trucks arrive with a 1-inch factory lift and are excluded, as are trucks with 4-Corner Air-Suspension. Shipping weight: 292.0 lb.
What’s in the box
Kit contents
- 1× Kit Box 88330994
- 1× Crossmember Box Kit 33430BOX1
- 1× Dr Knuckle 88330992
- 1× Ps Knuckle 88330993
- 1× Loaded Strut Pair 501062
- 1× N3 Shock Pair 23207
- 1× RR 6" Dual Rate 9425-2
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 88331 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 88331 |
| UPC / GTIN | 00840269968617 |
| Lift height | 6 in |
| Shock package | N3 series |
| Shipping weight | 292 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here