3.5-Inch Lift Kit with N3 Shocks for Jeep Grand Cherokee (1993–1998) — Part 632.20
- Covers 1993–1998 Jeep Grand Cherokee and 1993–1995 Cherokee applications listed in the fitment section
- Does not fit AWD models or models with the 6-cylinder engine
- Kit contents include a 4-inch front coil set, a 4-inch N3 shock kit, and a 0.75-inch leveling kit
- CV-style front driveshaft applications may develop vibration after lift
- Estimated install time 4-6 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- AWD models
- Models with 6cyl engine
Stock front coil springs are moved to lift the rear. Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs replacing the driveshaft Fitment on this page is based on the manufacturer’s application data.
About this kit
3.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 632.20 is a 3.5-inch lift kit built around N3 series shocks for the 1993–1998 Jeep Grand Cherokee, with listed coverage also spanning the 1993–1995 Cherokee. It will not work on AWD models or on models with the 6-cylinder engine, so confirm your drivetrain and engine before ordering.
This 3.5-inch lift kit for the 1993–1998 Jeep Grand Cherokee bolts on with lifted front coil springs, fixed lower control arms, extended sway-bar links, crossmember spacers, and hardware up front, plus fixed lower control arms, a track bar bracket, and hardware at the rear. The factory front coil springs are relocated to raise the back of the vehicle. Rough Country estimates 4-6 hours of shop time. On Jeeps using a CV-style front driveshaft, driveshaft vibration can show up after the lift. Check the exclusions below, then pull the downloadable installation guide before you start.
What’s in the box
Kit contents
- 1× 0.75 Inch Leveling Kit 7596
- 1× 4in FR Coil 9270
- 1× 636 Kit Box 1636
- 1× 4in N3 Shock Kit 1632BOX1
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 632.20 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 632.20 |
| UPC / GTIN | 00843030129453 |
| Lift height | 3.5 in |
| Shock package | N3 series |
| Shipping weight | 89.4 lb |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here