6.5-Inch Lift Kit with N3 Shocks for 1984-2001 Jeep Cherokee XJ
- Fits 1984-2001 Jeep Cherokee, 4WD and RWD, across Base through Limited and Sport trims
- Kit contents: 6.5in coils, 4in rear leaf springs, forged adjustable track bar, N3 shock kit, control arms, transfer case drop, and pitman arm
- A slip yoke eliminator with CV driveshaft is recommended to control driveline vibration
- 35-inch tires require fender trimming; some listed wheel and tire combinations are also flagged for trimming
- Listed install time 6-8 hours — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
A Slip Yoke Eliminator with CV Driveshaft are highly recommended to avoid driveline vibration. If running 35" tires they will require fender trimming to clear. Fitment on this page is based on the manufacturer’s application data.
About this kit
6.5-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 69620 is a 6.5-inch lift kit for the 1984-2001 Jeep Cherokee in 4WD and RWD form. The box carries 6.5in front coils, 4in rear leaf springs, a forged adjustable track bar, and an N3 shock kit. Rough Country advises pairing it with a slip yoke eliminator and CV driveshaft to keep driveline vibration in check, and 35-inch tires call for fender trimming.
This 6.5-inch lift kit for the 1984-2001 Jeep Cherokee covers Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, and Sport trims in both 4WD and RWD. The front side brings lifted coils, adjustable upper and lower control arms, a forged adjustable track bar with bracket, a transfer case drop, a pitman arm, sway-bar quick disconnects, and brake line brackets; the rear adds lifted leaves, adjustable shackles, U-bolts, and hardware. N3 nitrogen-charged shocks handle damping. Rough Country lists 6-8 hours for the job, and a downloadable installation guide is available. Check the tire and wheel chart before ordering.
What’s in the box
Kit contents
- 1× Track Bar 1042
- 2× 4in Rear Leaf Spring 8047E
- 1× N3 Shock Kit 169630
- 1× 6.5in Coils 9275
- 1× Kit Box For 696s 1696BOX1
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 69620 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 69620 |
| UPC / GTIN | 00843030124694 |
| Lift height | 6.5 in |
| Shock package | N3 series |
| Shipping weight | 208 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here