3-Inch Lift Kit with N3 Shocks for Jeep Cherokee (1984-2001)
- Fits 1984-2001 Jeep Cherokee XJ, 4WD and RWD, Base through Limited trims
- Kit contents: 2 rear leaf springs, front coils, and the 630N2 N3 shock box kit
- Raises the front about 3 inches and the rear 1.5-2 inches for a level stance
- Bolt-on installation with no major modifications called out in the feed facts
- Downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
About this kit
3-Inch Lift Kit with N3 Shocks, fitment-checked
Rough Country 630N2 is a 3-inch lift kit for the 1984-2001 Jeep Cherokee XJ in both 4WD and RWD form. The kit pairs front coils with a pair of replacement rear leaf springs and an N3 shock box kit, and it bolts on without cut-and-weld modification.
This 3-inch lift kit for the 1984-2001 Jeep Cherokee XJ ships as a matched package: two replacement rear leaf springs, a set of front coils shared with the Comanche MJ application, and the 630N2 N3 box kit that carries the shocks and hardware. Front ride height comes up roughly 3 inches with 1.5-2 inches at the rear, which pulls the nose level with the tail rather than leaving factory rake. Fitment covers Base through Limited trims in 4WD and RWD. Shipping weight: 152.4 lb. A downloadable Rough Country installation guide is available before you start.
What’s in the box
Kit contents
- 2× 3in Rear Leaf Spring 8024
- 1× 3in Coils 9262
- 1× 630n2 N3 Box Kit 1630BOX1
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 630N2 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 630N2 |
| UPC / GTIN | 00843030129644 |
| Lift height | 3 in |
| Shock package | N3 series |
| Shipping weight | 152.4 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here