5-Inch Lift Kit with N3 Shocks for 2000–2001 Dodge Ram 1500 4WD

About this kit

5-Inch Lift Kit with N3 Shocks, fitment-checked

Rough Country 372.20 is a 5-inch lift kit for the 2000–2001 Dodge Ram 1500 4WD in ST, SLT, Sport, and Laramie trims. The kit pairs lifted front coil springs with an N3 shock set, control arms, a pitman arm, drop brackets, and 4-inch fabricated rear blocks with U-bolts. It bolts on with no cutting or welding called for.

This 5-inch lift kit for the 2000–2001 Dodge Ram 1500 4WD raises the front on new coil springs and sets the rear on fabricated blocks, so the factory rake flattens out and ground clearance goes up together. Front hardware covers upper and lower control arms, a pitman arm, a track bar drop bracket, and sway-bar drop brackets; the rear side adds U-bolts and hardware. N3 series shocks with application-specific valving handle damping. Rough Country lists an install time of 4-6 hours, and a downloadable installation guide is available. Check the wheel and tire chart before ordering — a few 22-inch combinations call for minor trimming.