6-Inch Lift Kit for 2025-2026 Ram 1500 4WD — Part 88330
- Fits compatible 2025-2026 Ram 1500 4WD trims — confirm your truck against the exclusions below
- Does not fit factory 22-inch wheels, 4-Corner Air-Suspension trucks, or Warlock models with the 1-inch factory lift
- Not recommended for AWD due to pinion angle and resulting driveline vibration
- Requires 20-inch or larger wheels; 18-inch and smaller will not clear
- Kit contents: 6-inch spacer kit, crossmember kit, and driver- and passenger-side knuckles
- Shock series is configurable, from N3 to Vertex reservoir shocks — shipping weight: 207 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models with 4-Corner Air-Suspension found standard on Limited and Limited Longhorn models
- Warlock models
- 18" or smaller wheels
Due to differences in hub sizing this kit does NOT work on models equipped with factory 22" wheels. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped click here. Kit is NOT recommended for AWD models due to pinion angle issues which cause drivetrain vibrations. Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit, fitment-checked
Rough Country 88330 is a 6-inch lift kit for compatible 2025-2026 Ram 1500 4WD trucks. The box carries a spacer kit, a crossmember kit, and driver- and passenger-side knuckles. Wheels must be 20 inches or larger; 18-inch and smaller wheels will not work, and factory 22-inch wheel hub sizing is not supported.
This 6-inch lift kit for the 2025-2026 Ram 1500 4WD covers trims from Tradesman and Express up through Laramie, Rebel, Tungsten, RHO, and Special Service, subject to the exclusions listed here. It will not work on trucks with factory 22-inch wheels or with 4-Corner Air-Suspension, which is standard on Limited and Limited Longhorn. Warlock models already carry a 1-inch factory lift and are not covered, and the kit is not recommended for AWD because of pinion angle. Shocks are chosen separately, from N3 to Vertex reservoir units. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× Kit Box 88330994
- 1× 6in Spacer Kit Box 33430992
- 1× Crossmember Box Kit 33430BOX1
- 1× Dr Knuckle 88330992
- 1× Ps Knuckle 88330993
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 88330 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 88330 |
| UPC / GTIN | 00840269952326 |
| Lift height | 6 in |
| Shipping weight | 207 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here