6-Inch Lift Kit for Ford Ranger, Steel Knuckles
- Ford Ranger 2019-2023, 4WD, XL, XLT and Lariat
- Works ONLY with factory cast steel knuckles
- Aftermarket wheels limited to 6 inches of backspacing
- Factory 17-inch and 18-inch wheels will not work
- N3 shocks included; shipping weight: 157 lb
The Trail Fortress check
Will it fit your truck?
✓ Fits
Aftermarket wheels must not exceed 6" of backspacing Factory 17" and 18" wheels will not work with this kit Only works with factory cast steel knuckles Fitment on this page is based on the manufacturer’s application data.
About this kit
6-Inch Lift Kit, fitment-checked
The cast steel knuckle version of Rough Country's 6-inch Ranger kit. Identical vehicle coverage to the aluminum-knuckle kit, so the knuckle material is the entire buying decision.
Two 6-inch Ranger kits exist and the fitment table is the same for both — Ford Ranger 2019 to 2023, 4WD, in XL, XLT and Lariat trim. The difference is under the truck: this kit works only with factory cast steel knuckles, where its companion is for the aluminum ones. Getting it wrong means the parts will not go together, so identify the knuckle before ordering. Wheel constraints apply either way: no more than 6 inches of backspacing on aftermarket wheels, and factory 17-inch and 18-inch wheels will not work. Shipping weight: 157 lb.
What’s in the box
Kit contents
- 1× 6in Kit Universal Kit Box 509BOX1
- 1× 6in Kit Crossmember Box 509BOX2
- 1× 6in FR Box Kit 509BOX3
- 1× 6in Kit Knuckles 509BOX4
- 1× N3 Shock Pair 23305
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 50930 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 50930 |
| UPC / GTIN | 00843030197469 |
| Lift height | 6 in |
| Shipping weight | 157 lb |
| Country of origin | US |
| Category | Suspension & Lift Kits › Lift Kits |
Why buy here