2-Inch Lift Kit with N3 Struts for Ram 1500 4WD (2012–2024)
- Fits 2012–2018 Ram 1500 4WD and 2019–2024 Ram 1500 Classic 4WD — check the exclusions before ordering
- Loaded N3 leveling strut assembly gives 2 inches of front lift and leaves roughly 1 inch of rear rake
- Not for trucks with the 3.6L Pentastar V6 engine or 4-corner air suspension (Rebel, Limited)
- Not for Warlock models, which already carry a 1-inch factory lift
- Bolt-on installation with no cutting or drilling — downloadable installation guide available
The Trail Fortress check
Will it fit your truck?
✓ Fits
✕ Does not fit
- Models equipped with a 3.6L Pentastar V6 engine
- Models with 4-Corner Air-Suspension found standard on Rebel and Limited models
- Warlock models
Optional replacement struts ONLY give 2-inches of front lift. This package is an available upgrade across multiple sub-models. For a visual to confirm if your vehicle is equipped click here. Fitment on this page is based on the manufacturer’s application data.
About this kit
2-Inch Lift Kit with N3 Struts, fitment-checked
Rough Country 358.23 is a 2-inch front lift package for 2012–2018 Ram 1500 4WD and 2019–2024 Ram 1500 Classic 4WD trucks, built around a loaded N3 leveling strut assembly. The replacement struts produce 2 inches of front lift and leave roughly 1 inch of rear rake. It does not fit trucks with the 3.6L Pentastar V6, 4-corner air suspension (standard on Rebel and Limited), or Warlock models.
This 2-inch lift kit for the 2012–2018 Ram 1500 4WD and 2019–2024 Ram 1500 Classic 4WD covers trims from Tradesman and Express through Laramie Longhorn, plus Special Service on the Classic. Inside the box is one loaded N3 leveling strut assembly, so the front end gains 2 inches of height while about 1 inch of factory rake stays in the rear for towing and cargo duty. Installation is bolt-on, with no cutting or drilling called out. Confirm your engine and suspension type first — the Pentastar V6, air-suspension, and Warlock exclusions are firm. A downloadable installation guide is available.
What’s in the box
Kit contents
- 1× 2.5 Kit Boxstruts 1358
- 1× N3 Leveling Struts 501028
Rough Country shares subassemblies across kits, so individual package labels can carry broader application ranges. The complete 358.23 kit fits the vehicles shown in the fitment section above.
Specifications
Specs
| Brand | Rough Country |
| Part number | 358.23 |
| UPC / GTIN | 00843030133986 |
| Lift height | 2 in |
| Shock package | N3 series |
| Shipping weight | 14 lb |
| Country of origin | CN |
| Category | Suspension & Lift Kits › Lift Kits |
| Installation guide | Downloadable PDF |
Why buy here